homestudioreview 
Nowadays, there are so many products of 7 gallon hot water tank in the market and you are wondering to choose a best one. You have searched for 7 gallon hot water tank in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 7 gallon hot water tank which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
Camplux ME60 Mini Tank Electric Water Heater 6-Gallon,1.44kW at 120 Volts
- 6-gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.
- Electric water heater is easy to maintain and has glass-lined tank for long service life
- Thermostat Control allows adjustment of water temperature.High Limit device provide protection while overheating.
- Plugs into 120 volt outlet for independent installation or in-line with a large hot water source.(Max. water pressure is 150 PSI,CSA listed Temperature & Pressure relief valve included)
- Can be shelf, wall or floor mounted (bracket included)
- Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Product dimension:15.75″ W x 21″ H x 15.5″ D.
Similar items with 4 stars and above
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8) – Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted (Renewed)
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Reliance 6 6 SOMS K 6 Gallon Compact Electric Water Heater
- Ideal for under counter or crawl space installation
- 6 gallon short, 6 year warranty, electric.
- Single 120 volt 1650 watt copper heating element.
- Side mounted cold water inlet and hot water outlet for easy installation.
- Factory installed Temperature and Pressure, T&P relief valve
Product Description
606 series. 1650/120V. UL listed. No dip tube since the bottom inlet eliminates need for it. 1″ foam insulation/16.00 R-value. Factory installed T&P valve. Meets NAECA codes. Glass lined tank. Inlet and outlet connections on side for easier installation in tight spaces. Warranty: 6 year tank/parts.
From the Manufacturer
Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.
Bosch ES8-Point-Of-Use Electric Mini-Tank Water Heater, 7.0-Gallon
American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Ariston GL6+S Electric Mini-Tank Water Heater
- Keeps 7 gallons of hot water ready to go and draws only 12.5AMPS
- Must be hardwired into 120V
- Can be installed under the sink, on the floor or mounted on the wall
- A Pressure relief valve is included
- Ariston GL6+S replaces the Ariston GL6+, but the GL6+S does not come with a power cord while the GL6+ did
Amazon.com
The Ariston 6-gallon point-of-use electric mini-tank water heater eliminates the wait time for hot water to come from one or two sink faucets. You can install the heater independently or in-line with a larger water-heating source. You need no hard wiring to power your unit; simply plug it into any standard outlet and this heater’s ready to go. The glass-lined tank ensures long life, and the superior insulation provides quick recovery and greater energy efficiency. This 120-volt, 1500-watt water heater weighs 30 pounds and measures 14.5 x 17.5 x 17.5 inches. Ariston backs its heater with a manufacturer’s 6-year limited warranty for the heat exchanger and a 1-year limited warranty for parts.
From the Manufacturer
Installing an Ariston electric mini-tank water heater under the sink puts hot water right where you need it at the point-of-use. Lightweight and compact this heater is available in three space-saving sizes: 2.5, 4, and 6+ gallons. These heaters are aesthetic on the outside, glass-lined on the inside, and offer superior insulation for higher efficiency.
Class A Customs 7 Gallon Water Holding Tank NSF Approved T-700
- 7 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs – NSF FDA Approved & BPA FREE – Fresh & Drinking Water Safe
- WATER TANK MEASUREMENTS: 23 3/4” Longest Length (not including fittings) x 7” x 9 3/4” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25″ on each measurement)
- BUILT-IN FITTING: (ONE) 1½ ” Dia screw in balloon fitting (threaded female – NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (THREE) ½ ” Dia screw in fittings (threaded female – NPT Standard)
- NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish.
- Great extra water storage in RV, pop-up camper, off road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item here in the US in Elkhart, Indiana. NSF paperwork readily available and NSF logo molded into the tank.
NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.
Class A Customs 7 Gallon Water Tank & Plumbing Kit T-700-BPK
- 7 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs – NSF FDA Approved & BPA FREE – Fresh & Drinking Water Safe
- WATER TANK MEASUREMENTS: 23 3/4” Longest Length (not including fittings) x 7” x 9 3/4” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25″ on each measurement)
- BUILT-IN FITTING: (ONE) 1½ ” Dia screw in balloon fitting (threaded female – NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (THREE) ½ ” Dia screw in fittings (threaded female – NPT Standard)
- NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish.
- BASIC PLUMBING KIT INCLUDES: 2 (Two) ½” Hose Barb to ½” Male Pipe Thread Adapter 4 (Four) ½” Hose Clamp 1 (One) 1 ¼” Hose Barb to 1 ½” Male Pipe Thread Adapter 2 (Two) 1 ½” Hose Clamps 1 (One) 1 ½” Male Pipe Thread PVC Male Adapter 1 (One) 5ft. Section of ½” ID Vent/Draw Hose 1 (One) 5ft. Section of 1 ¼” ID (1 ⅜” OD) Fill Hose
NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.
Conclusion
By our suggestions above, we hope that you can found 7 gallon hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!
