homestudioreview 
Nowadays, there are so many products of wood stove heating fan in the market and you are wondering to choose a best one. You have searched for wood stove heating fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings wood stove heating fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
VonHaus Large 4 Blade Heat Powered Wood Stove Eco Fan with Temperature Gauge- Ultra Quiet Fireplace Wood Burning Fan for Efficient Heat Distribution – Black
- IMPROVE THE PERFORMANCE OF YOUR STOVE HEATER – heat-powered fan increases the efficiency of your freestanding stove heater/pellet heater, or wood/log burner by effectively distributing heat. Includes a magnetic temperature gauge to monitor the heat and stove fan performance
- NO POWER SOURCE REQUIRED – a thermoelectric module acts as a small generator to power the fan’s premium quality motor. No batteries or electricity required!
- SELF REGULATING – operates automatically between 122 – 660°F with self-regulating speed. The temperature gauge included allows you to monitor and optimism stove fan efficiency to avoid damage by overheating. 160 – 190 CFM
- ENERGY SAVING – there’s no need to invest in additional heat sources or turn up the power on your stove, you can enhance the conditions with effective distribution alone
- DIMENSIONS – H9″ x W7.4″ x D3.5 inches. Extra-large design to make maximum impact
Similar items with 4 stars and above
GALAFIRE [2 Years Warranty] Eco Heat Powered Wood Stove Fan for Gas Fireplace, Pellet Stove, Log Burner, fire Place + Stove Thermometer Magnetic N430
- ✅ [ Must Have Fireplace Accessories ] – Silent 4 blade heat powered wood stove fan + Magnetic Stove Thermometer,widely used for wood burning stove,gas stove,pellet stove,etc.
- ✅ [ No Running Cost ] – Heat powered stove fan fast started at temp as low as 50°C/122°F,no batteries required non-electric fan.If the max temperature on your stove top is even below 100°C/212°F,DO NOT buy,the fan will can’t work efficiency.The optimum operating temp is around 250°C/482°F,max temp DO NOT exceed 350°C/662°F
- ✅ [ Burn Less Fuel ] Large airflow,increase stove efficiency with burn less fuels,make you feel warm much faster. To maximize its efficiency and avoid damage,keep a distance with chimney pipe,DO NOT placed on heat vents/grilles.
- ✅ [ Whisper Quiet,No Noise ] Silent operation,spread heat around room and increase room temperature without notice.If your stove fan received has noise problem,normally because of the fan blade got bent during shipping,fix it by hand if possible,or contact us for replacement.
- ✅ [ 2 Years International Warranty,Lifetime Technical Support ] – Any suggestion or complaint during uses,just contact us directly for solution
[ 2 Years Warranty ] Free Stove Thermometer + 50°C Start Silent Heat Powered Wood Stove Fan for Pellet / Wood Burning Stove Log Burner 4 Blade Black Small Height Stove Fireplace Accessories (N429)
- ✅ [Must Have Fireplace Accessories ] – Silent 4 blade heat powered wood stove fan make you feel warm much faster + Magnetic Stove Thermometer monitor operating temperature to avoid overheating. Keep a distance with chimney pipe,DO NOT placed on heat vents/grilles.
- ✅ [ Compact Design,Widely Used ] – Height only 19cm/7.48” to fit narrow spaces,ideal for all kinds of wood burning stoves,gas stoves,pellet stoves,etc.
- ✅ [ Fast Started, No Running Cost ] – Heat powered stove fan fast started at temp as low as 50°C/122°F,no batteries required non-electric fan.If the max temperature on your stove top is even below 100°C/212°F,DO NOT buy,the fan will can’t work efficiency.The optimum operating temp is around 250°C/482°F,max temp DO NOT exceed 350°C/662°F
- ✅ [Burn Less Fuel ,No Noise ] Large airflow,increase stove efficiency with burn less fuels,no noise,silent operation.If your stove fan received has noise problem,normally because of the fan blade got bent during shipping,fix it by hand if possible,or contact us for replacement.
- ✅ [ 2 Years International Warranty,Lifetime Technical Support ] – Any suggestion or complaint during uses,just contact us directly for solution
HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer for Use with Wood Burning Appliances, UL Listed, Fits 6" Single Wall Chimney Pipe
- Only UL listed heat reclaimer on the market. Reclaims up to 30% of otherwise lost heat going up your chimney and distributes it into your home.
- Crimp down configuration is designed for use with wood burning heating applications with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees.
- Easy to install. Fits 6″ flue diameter. Built in soot scraper cleans tubes internally allowing for maximum heat transfer.
- Plugs into any standard 110V household outlet. Removable back allows for easy maintenance. Designed for use with single wall connector pipe.
- Toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or thermostat control mode. Made in the USA. One Year Limited Warranty.
Magic Heat is the only UL listed heat reclaimer on the market. Magic Heat reclaims up to 30% of lost heat form your heating appliance and distributes it into your home using only .31 amp of power, roughly equivalent to a 40 watt lightbulb. Magic Heat is designed for heating appliances with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees. The bottom crimp design makes this unit ideal for wood burning heating applications by containing any creosote within the chimney. A toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or a pre-set thermostat automatically turns the blower fan on when the Magic Heat casing reaches 150 degrees and off at 120 degrees. Magic Heat is easy to install and must be installed between 12 and 24 inches from the appliance flue outlet using single wall connector pipe. How it works: As hot flue gases travel from your heating appliance upward through the flu, they heat the transfer tubes in the inner case. Fresh room air enters thru the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 British Thermal Units (BTU) of lost heat. Flue gases are not restricted and continue up your chimney. Magic Heat is available in 6″, 7″ and 8″ pipe diameters for wood, oil/coal or natural gas burning heating appliances. Manufactured in the USA.
TOMERSUN 3 Blades Heat Powered Stove Fan for Wood/Log Burner/Fireplace
- Compact Size–8.7 x 6.7 x 3.6 inches,the material is aluminum.
- No Batteries or Electricity required–The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.
- Longer lifetime–There is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 300℃,the safety device gently elevates the front of the fan to protect the TEG and motor.
- Whisper-quiet–The only moving part is the blade assembly.You don’t even know this fan is there,but you FEEL the WARMTH!
- Less Consumption ,More Efficiency–Reduce the fuel consumption and make the room warmer quickly.
VODA 4-Blade Heat Powered Stove Fan for Wood/Log Burner/Fireplace Increases 80% More Warm air Than 2 Blade Stove Fan- Eco Friendly
Sonyabecca Heat Powered Stove Fan with Magnetic Thermometer 4 Blade Wood Stove Fans Aluminium Silent Eco-Friendly for Wood Log Burner Fireplace
- Heat powered: Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly.
- 4-blade, large air volume: Upgrade 4 blades, diffuse warm air throughout the whole room. Just place the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe. Need to place stove fan at least 4″ away from stovepipe. It will work when the stove surface hot.
- 50°C(122°F)-340°C（644°F) working temperature: The fan spins when the temperature is reached 50°C(122°F).The hotter the base of the fan gets, the faster the fan turns, and the more air the fan circulates into the room. It will slow down and stop as the stove cools. Also come with a magnetic thermometer to monitor temperature.
- Anodized aluminum material: The whole fan is made from anodized aluminum, which will not rust or corrode when the fan is getting hot.
- Quiet, no noise & 1 year warranty: The only moving part is the blade assembly, quiet and no noise generate. You will not even know this fan is there, but you will feel the warmth. 1 year warranty, please feel free to contact us if you have any question.
CWLAKON Heat Powered Stove Fan-2019 Upgrade Designed Silent Operation 4 Blades with Stove Thermometer for Wood/Log Burner/Fireplace-Eco Friendly and Efficient Heat Distribution(Black)
- 【Start Automatically】2019 Upgrade Technology,Reinforced 4 Blades,Faster Speed,Larger Air Volume.The heat powered stove fan is designed to circulate the warm air created by a wood / coal or pellet burning.Efficiently circulates warm air throughout the room.
- 【Eco-Friendly and Self-Powered】Thermoelectric module acts as a small generator to power the fan’s motor. No batteries or electricity required! Improved warm air circulation results in greater comfort and reduce wood consumption from your stove.Stove operating with normal surface temperatures between 122°F(50°C) and 716°F(380°C).[Energy Class A+++]
- 【Whisper Quiet】Newly Designed Blade,Larger Air Volume,Lower noise.You don’t even know the stove fan is there,but you feel the warmth!You will enjoy the warm air in a quiet and comfortable environment.
- 【Safty Design】The stove fan support is made with Anodized Aluminum, able to resist high temperature up to 662°F(350°C), no deformation and no discoloration even after long time working under high temperature.
- 【Longer Lifetime】There is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 400°F (200°C),the safety device gently elevates the front of the fan to protect the TEG and motor.
PYBBO 5 Blades Improved Wood Burning Stove Fireplace Fan Silent Motors Heat Powered Eco Stove Fan for Gas/Pellet/Wood/Log Stoves with Magnetic Thermometer
- Upgraded 5-Blade will provide larger air volume, making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove
- No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan’s motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- Silent operation, spread heat around room and increase temperature with low noise, impove warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection
- Overheating Protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module
- Recommended surface temperature is between 122°F – 644°F (50°C – 340°C), and turns most efficiently when the temperature reaches about 200°C. ( for wood stove fireplace fan)!!! Note: PYBBO provide the 12 – month warranty for all of our customes, no matter what problems you have, just feel free to contact us
ECOFAN AirMax Wood Stove Fan, Large, Black Blade
- Warm your room up to 38% faster with the largest and highest performing Ecofan model, the Ecofan AirMax
- Ideal for all room sizes, the AirMax circulates more warm air further into your home!
- Tested and proven to save you up to 18% in fuel with more efficient distribution of heat from your wood stove
- No electricity needed, Ecofans generate power by converting the heat from your wood stove into electricity
- Designed and manufactured in Canada for over 20 years, Ecofans have been tested in the harshest winters and come with a 2 year limited warranty
If you own a free-standing wood stove you need an Ecofan! This unique accessory is designed to sit on top of your wood stove and circulate warm air through the room quickly and efficiently. By creating its own electricity from the heat of your stove, Ecofans do not need household energy or batteries. And unlike noisy built-in blowers, the economical Ecofan is whisper quiet. THE ECOFAN AIRMAX is the most powerful model in the Ecofan family, moving up to 175 cubic feet of air per minute (CFM). It is also the largest model at 10” tall x 5.5” wide x 3.3” long and comes with your choice of gold, nickel or black blade colour. The AirMax operates at a stove surface temperature range of 185° F to 650° F (85° C to 345° C). The AirMax has the lowest minimum operating temperature, providing you with the longest operating time of all the Ecofan models.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found wood stove heating fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
