Best Water Fuel Separator Filter For Gasoline
Nowadays, there are so many products of water fuel separator filter for gasoline in the market and you are wondering to choose a best one. You have searched for water fuel separator filter for gasoline in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water fuel separator filter for gasoline which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
48,785 Reviews Scanned
Moeller 033320-10 10 Micron Water Separating Filter Kit
- 10 Micron Water Separating Filter Kit
- Designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications
- Includes a powder coated reusable filter head, filter, barbs and plugs
- Not recommended for use with electric fuel pumps
The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.
GOLDENROD 496-3/4 WATER-BLOCK FILTER (56591) Bowl Fuel Tank Filter with 3/4" NPT Top Cap
- Removes water from gasoline & diesel fuel,
- 17 micron filtration,
- Water absorbing polymers trap water
- Restricting fuel flow when it is time to replace the element,
- May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element
- Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint
- Zinc die-cast top cap with 3/4″ NPT pipe fittings
- See-Through bowl allows for visual monitoring of fuel flow
- Maximum recommended flow rate of 25 GPM
- working pressure up to 150 psi
WATER-BLOCK filter removes water from gasoline and diesel fuel. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Also removes microscopic particles (17 microns) of rust, sand, dirt, scale and lint. Also compatible with biodiesel blends up to 20%. Zinc die-cast top cap with 3/4 inch NPT pipe fittings. See-Thru bowl allows for visual monitoring of fuel flow. Maximum recommended flow rate is 25 gpm. Gravity flow rate is approximately 5 gpm with a 24 inch head. Working pressure up to 150 psi.
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
iFJF Black 130306380 Fuel Filter for Assembly Perkins 130306380 FG Wilson 0000000038 Filters FINFF30614
- Similar to FG Wilson 0000000038,00000-00038,In-Line Filters FINFF30614,FIN-FF30614.
- Material:The reusable clear collection bowl are made of nylon.High temperature resistance,not easy to fall color,not easy to deformation characteristics.You can be assured of using it.
- Seal:The product is equipped with a rubber ring.Very strong,good sealing,no leakage.
- Features:There is a filter inside the Fuel Filter. The filter is made of aluminum. Anti-rust, anti-oxidation, anti-corrosion.
- DIMENSIONS: Height: 130mm,OD/Width Max: 92mm,OD/Width Min: 52mm,ID/Depth Max: 8mm,ID/Depth Min: 8mm.
Product benefits:
1.The reusable clear collection bowl are made of nylon.High temperature resistance.Not easy to fall color,not easy to deformation .It will not damage this collection bowl because of the high temperature of the oil.
2.The top plug of the fuel filter is used for drainage.The water can be controlled by adjusted the plug at the top.
3.The bottom two plugs of the fuel filter are used for air-bleed.Can be discharged the excess gas.
4.Inside filter can anti-oxidation,anti-rust,anti-corrosion.Does not cause difficulty in filtering.There are many small holes on the filter surface that can be effective in filtering impurities.At the same time, it is made of a whole piece of aluminum, will not tear.Easy to disassemble.So when you use it for a while, you need to clean it. In this way,it can play the best effect.
Ebely R12T Fuel Fittings Marine Spin-on Fuel Filter Water Separator 120AT NPT ZG1/4-19 Fit Gasoline Engine and Diesel Engine
- Fitment:Gasoline Engine and Diesel Engine
- This R12T fuel filter water separator is equipped with a self-draining drain to remove unnecessary dirt and water, the filter design is easy to replace, and the reusable transparent nylon collection bowl
- This is a separator for diesel and water, and a separator for gasoline and water.
- The flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean
- The filter unit coated with a durable coating of electrostatic powder coating, having excellent corrosion resistance
Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.
Replacement S3213 Fuel Water Separator Filter Kit Assembly Boat Fuel Filter Marine Engine Fuel Water Separator for Mercury Yamaha Outboard 10 Micron
- BRAND:IVSPEED,Material:The filter is made of aluminum. Anti-oxidation/corrosion. Long service life.
- Include:IVSPEED S3213 assy,PTFE-tape,Memo Pad,Hose Clamp.Features:10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from gasoline.
- Function:It contributes to clear contaminates protect fuel system.
- Water separating canisters:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1 and Universal.
How use?
1.Before installing the filter, please check those Tubing and plugs,PTFE-tape is use to Prevent leaks from these plugs.
tips:1m PTFE-tape include.
2,install the plugs,Connect the fuel pipe and use the Hose Clamp to lock.
3.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
Please ensure that the assembly is stable.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
(Professional tools may be required to remove bowls and filter element)
4.Wipe O-ring gland clean,and coat bowl’s sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.
5.Coat filter element’s sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.
Instructions
To Drain Water:
1.off engine,Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Warning:
Periodically check fittings and filter element for leaks.Be careful when changing fuel filter element .Gasoline is extremely flammable and highly explosive under certain conditions.Avoid spilling gasoline.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Tips:
replace element by tool
replace element at regular.
CHECK THE ELEMENT SUGGEST:EACH 7000KM/400 HOURS.
Package include:
1 IVSPEED S3213 assy
1*1M PTFE tape
1*Memo sticker for time or KM when use
2*Miniature Stainless Worm Gear Hose Clamp
1*Manual(some mode)
Sierra 18-7982-1 Fuel Water Separator Kit
- Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
- Prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
Yamaha 10-Micron Fuel/Water Separating Filter MAR-10MEL-00-00 MAR-FUELF-IL-TR
Brand new, genuine Yamaha Marine Fuel/Water Filter, MAR-FUELF-IL-TR. This is a factory original equipment part, not aftermarket.
Sierra International 18-7945 10 Micron Fuel Water Separating Filter for Mercury/MerCruiser and Yamaha
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Replaces: Mercury/MerCruiser 35-802893Q01, 35-604941, 35-60494, 35-55501, 35-57250, 35-60494A5, 35-806771, 35-8052691, 35-802893Q, 35-807172 and Yamaha ABB-FUELF-IL-TR
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-7945 10 Micron Fuel Water Separating Filter for Mercury/MerCruiser and Yamaha
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline • Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Replaces: Mercury/MerCruiser 35-802893Q01, 35-604941, 35-60494, 35-55501, 35-57250, 35-60494A5, 35-806771, 35-8052691, 35-802893Q, 35-807172 and Yamaha ABB-FUELF-IL-TR
• Filter Size: Long – 4.35″ or 110.5mm
• Rating: 10 Micron
• Flow: 90 GPH
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.
SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
S3213 Marine Fuel Water Separator Filter Assembly with Clear Bowl 18-7922, 3/8 Inch NPT Port For Outboard Motor Mercury 35-60494-1 Yamaha Racor Sierra Engine Boat 10 Micron – Replaces B32013, 18-7932
- REPLACMENT FUEL WATER SEPARATOR FILTER KIT – With advanced filtering media, this 10 micron filter are over 92% efficient at trapping the smallest particles and emulsified water from gasoline. Therefore, it can provide the best defense for sensitive inboard, stern-drive and outboard fuel injection systems.
- APPLICATIONS AND PART NUMBER – Fits for Marine outboard gasoline engines only! Replaces Mercury 35-60494-1
- Replaces Racor S3213, B32013
- 18-7932-1, 18-7932, 18-7928-1, 18-7928 | Filter Replaces Mercury Marine 35-809097, Racor S3213, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1 | Bowl Replaces 18-7922-1, 18-7922 | Bracket Replaces 18-7853-1. Please check the Part Number before ordering, Thank You!
- OEM DESIGN, DIRECT FIT – Top-quality Marine Fuel Water Separating Filter, constructed of premium material for long lasting durability and reliability. High performance 3/8 NPT ports offer lower pressure drop rates. Great replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested before shipping.
- PAY ATTENTION – This a separator for Diesel & Water, It could not be for Petrol & Water separator. Frequency of water fraining or filter replacement is determined by the contamination level in fuel. Inspect or drain the collection bowl of water daily and replace the filter annually, whichever comes first. Gasoline is extremely flammable and highly explosive under certain conditions. Always stop engine and do not smoke or allow open flames in the area while changing filter element.
- BUY WITH CONFIDENCE – This S3213 Fuel Water Separator Filter Kit Assembly come complete with a 12-MONTH Warranty and LIFETIME Support, true hassle-free shopping experience. If you have any question, please feel free to contact us, we will help you sort it out asap 🙂
Features:
● High performance 3/8 NPT ports offer lower pressure drop rates.
● Direct Fit. Great replacement for your worn or broken fuel water separator filter!
● Traps 92% of harmful contaminants or small particles, provide strong protection of your fuel system.
OEM Part Number for Reference:
● Fuel Water Separating Filter Kit Relaces: Mercury 35-60494-1, Racor S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928
● Filter Replaces: Mercury Marine 35-809097, Racor S3213, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1
● Clear Bowl Replaces: 18-7922-1, 18-7922
● Bracket Replaces: 18-7853-1
To replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.
5.Coat filter element’s sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.
Attention:.
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-rings. As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank, Only thing is you have to make sure to get the proper sealant for the threads.
For The First time installation, In order to avoid any leaking at the threads. You’d better get some thread paste since the tape might plug the injectors if it were to come loose.
3.Check and replace regularly.
Conclusion
By our suggestions above, we hope that you can found water fuel separator filter for gasoline for you.Please don’t forget to share your experience by comment in this post. Thank you!