Which Is The Best Water Cooling Tool Kit

LENX 9 PCS PETG Tubing cut and bending tool kit

Package:
1.Cutter
2.Saw
3.3 pcs 45° 90° 180° PETG Bending Tool
4.2 pcs Bending Rubber
5.PETG Chamfer Tool
6.File

The Alphacool Eiskoffer is perhaps the most comprehensive collection of tools for bending 13mm or 16mm diameter HardTubes into nearly any form ever assembled. Inside the large, elegant, and sturdy case, each tool has its own separate place. All the tools are clearly arranged and neatly organised. The rubberised gloves ensure you always have a good grip on things, while also protecting you from splinters and dirt. The deburring tool is perfect for smoothing down HardTubes. Deburring is mandatory if you want the HardTubes to fit into their connectors properly. A long, sturdy saw and a mitre box serve to simplify cutting the HardTubes. The mitre box can be fastened to a table edge with special screw clamps, which are included. The inside of the mitre box is rubberised to prevent scratches and to keep the HardTubes from sliding around. The comprehensive set of measuring tools makes it easy to measure not just length, but also two or more angles at the same time. This tremendously simplifies the planning and execution of complicated bending sequences. In order to get the perfect bend each time, a substantial palette of bending radii and angles can be attached to the bending plate. The basis for this is formed by two different sizes of bending mandrels and arc mandrels. This allows you to bend HardTubes to any classic bending radius. The fitting stoppers can be used to simulate the depth of an Alphacool fitting on the end of the tube. This means an exact measurement and a perfect bend are always guaranteed when using Alphacool products. Alternatively, the straight mandrel with a stylus stopper can be used if you are using other products. The bending plate has a section that can accommodate self-designed or highly specialised bends. The case contains special flex mandrels that can be positioned in nearly any way. Model: 29131.

XSP PETG Easy Bending Tool suitable for 12-14mm outer diameter PETG tubing.

Model: 5060175586339

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Monsoon Mandrel Kit provides everything you need to fixture and bend acrylic hard lines. Includes mandrels in 45°, 90°, 180°, and 360°. Mandrels feature extended support “arms” that hold your tube in position while bending and set the precise angle you want. Mandrels feature polished center line channels that help maintain the tubes round shape while bending and allow the mandrels to perform double duty when mounted to your building board—they can be used to bend or as holding fixtures. Center line capabilities make loop planning, measuring, and using the fixtures very easy by eliminating all the hassle of inside/outside bend radius and top/bottom positioning. Each mandrel has one or more thru-holes that allow you to easily mount it flat to your building board and the included 90 degree brackets allow you to mount the mandrel vertically so you can fixture or bend in two planes simultaneously. Machined from solid aluminum and anodized for maximum durability and long service life. Tube channels are polished to prevent marring the tube while bending. Mandrels are clearly laser marked for bend radius and include hash marks in 1 degree increments. Mandrels are also color coded by tube size—Red for 1/2 x 5/8 (16mm) and Blue for 3/8 x 1/2 (13mm) to make grabbing the right size easy for pro modders. Includes all screws, brackets, hardware, and hex wrench.

Model: TKH-MAN-3812

Sleeved cables have become the norm for most modded computer builds and nothing is quite as good as when they’re hand made. The sleeved cables of most power supply manufacturers are usually loose, or you can see the original cable through the sleeve. This is not everyone’s cup of tea. Many modders want a nice smooth and tight sleeve, preferably in a colour of their choice but to do this, you will need the correct tools. Alphacool now offers the Eistools Crimping Kit which has everything you need to create your own perfect cables.

The crimping tools are safely stored in a foam insert inside a compact protective zipped case. This will ensure you can keep everything clean and tidy and makes it harder to lose anything.

Several pin removers are included so that the cables can be easily removed from the individual connectors. These are compatible to remove all Molex terminals which can be found on a typical PC power supply. Therefore 3 different female extractors are included and a male extractor for the PCIe, ATX terminals and the 4 or 8 pin EPS connectors.

Sharp side cutters have been included to allow you to cut wires to the desired length, whether you are shortening the original PSU cables or if you are creating your own, side cutters are always useful.

To help you sleeve, particularly with paracord like our Alphacord range, the Alphacool Eisttols Crimping Kit comes with a special sleeving needle. The cable itself can be inserted at the rear end of the needle and then the sleeving needle is simply pushed through the sleeve together with the cable. This prevents the cable from sticking to the sleeve or even damaging it.

Model: 29139

Barrow ABS 16MM Hard Tube Bending Kit, Black

Model: AWGM3-16

Product Description

Since our beginning, gear Wrench automotive specialty tools have been driven by innovation. From our first specialty tool, The model-t valve spring lifter, to our latest Ratcheting Puller, we’ve built our reputation with tools that make tough jobs easy.
most of our products have been upgraded with new improved features like dual material handles designed for a more comfortable grip or dual dipped handles on pliers providing more cushion for your hands. Gear Wrench automotive specialty tools are proudly made with the finest components under the most stringent manufacturing
guidelines. Made for everyday use – guaranteed for life. Better tools mean easier, more efficient work so we constantly evaluate automotive Engineering trends allowing us to consistently improve and enhance our tools to better fit professional hands. That’s why they are the first choice for thousands of automotive technicians worldwide.

From the Manufacturer

Deluxe fan clutch wrench set for removing and installing the fan clutch on many models when repairing or replacing water pumps, timing chains or the fan clutch. Kit includes: Universal Pulley Holder- designed to trap and hold bolt-on pulleys by the mounting bolts; Small pin set (5x8mm); Large pin set (cam pins, 6x10mm, 7.5x18mm); 22mm (7/8″) Ford Ranger 3.0L; 36mm (1-7/16″) Ranger, Explorer, Bronco; 40mm (1-9/16) F Series and E Vans; 47mm (1-7/8″) F Series and E Vans 50mm (2″).

Conclusion

By our suggestions above, we hope that you can found water cooling tool kit for you.Please don’t forget to share your experience by comment in this post. Thank you!