Which Is The Best Water Cooling Reservoir Glass

EK-XRES 140 Revo D5 RGB PWM is a High-Performance water cooling pump with integrated reservoir. The core of the unit is the market-proven Xylem D5 PWM water pump. EK-XRES 140 Revo D5 RGB PWM series features a fully rounded see-through acrylic design thus offering stunning looks and greater usability. This allows installation at any angle within 360° of rotation. Special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities. EK-XRES 140 Revo D5 RGB PWM reservoir comes preinstalled with anti-cyclone insert. Optional PU anti-vortex foam and EK-HD Tube is enclosed for additional options. Compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. This water pump/reservoir combo unit can be mounted directly on computer chassis by using enclosed Revo D5 Holder. The 60mm diameter tube is made of a high-quality acrylic material, while the reservoir bottom/pump top is CNC machined acrylic glass.

Model: 3830046992987

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 210 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

This is just a Acrylic Board Water and pump Channel Solution
as Water Channel use for Lian Li PC-011 Dynamic Case
This link don’t include any advice and case,just a acrylic board and pump
Compatible:
Asus Maximus VIII Hero
Asus Z170 Pro Gaming
Asus Z170-AR
Asus Z170-Pro
Asus Maximus VIII Ranger
Asus Maximus VIII Gene
Asus Z170-Deluxe
Asus Rog Strix Z370-F Gaming
Asus Rog Maximus X Hero
Asus Rog Maximus X (WI-FI AC)
Asus Rog Maximus IX Hero
Asus Rog Strix Z370-E Gaming
Asus Rog Strix Z370-H Gaming
Asus Rog Strix B360-F Gaming
Asus Prime Z370-A
Asus TUF Z370-Pro Gaming
Asus Rog Strix Z270F Gaming
Asus Rog Strix Z270E Gaming
Asus Rog Strix Z270H Gaming
Asus Rog Maximus VIII Formula
Asus Rog Maximus VIII Extreme/Assembly
Asus Rog Maximus VIII Hero Alpha
Colorful iGame Z370 Vulcan X
Colorful iGame Z370-X RNG Edition V20
Colorful iGame Z270 X
Asus MAXIMUS VII RANGER
Asus MAXIMUS VII GENE
Asus Z170-DELUXE
Colorful iGame Z270
Galaxy Z370 Gamer
Purchase Notes:
1. Lighting system: Bykski RBW (for waterway board package does come with RBW controller)
2. All , radiators, reservoirs, cases and other products in details photos are for reference only. If you want that kit, please search BYKSKI
3. This product is only compatible with Lian Li PC-011 Dynamic Case, may not be compatible with other cases.
4. Waterway Board only compatible with Bykski’s Intel CPU water blocks and suitable for single GPU building
5. Waterway Board material: matte acrylic + transparent acrylic
Please pay attention when installing::If want to connect to motherboard,pls make sure it is 5V AND 3PIN interface.
do not connect it to 12V RGB 4PIN interface,the Light will be burned.

Description:
Water tank is full open design, thread tighten up and down the structure of the tool to remove free help clean water cooling system.
50 mm outside diameter water tank, high temperature resistant acrylic material.

Free combination in water cooling kit cooling system.
Package includes:1 x Cylinder Reservoir Tank, 2 x Plastic Tank Bracket, 2 x Metal L Shape Bracket, 6 x Screw Nuts,6 × Screw.
Available tank Length: 9cm, 11cm, 14cm, 19cm, 24cm, 31, 40.5cm.

Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses – now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel. For use with Alphacool fittings only. Model: 18493.

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

The X4 Photon Reservoir/Pump Combo combines the ultimate tube reservoir with the new XSPC X4 pump. The X4 pump is a compact and high performance pump, designed for PC water-cooling. The pump has a flow rate of 600lph, a powerful head delivery of 3m and a ceramic shaft for longer life and reliability. The X4 offers similar performance to a D5 pump on setting 4, but at a lower noise level and a more affordable price. The Photon’s tube is made from a quality toughened glass, which is both crystal clear and highly resistant to staining. In the center of the tube is an acrylic lighting pole that connects to a 5mm LED on the base of the reservoir. The LED is easily replaceable so you can match the lighting colour to your build. Unlike other tube reservoirs, which use cheap plastic brackets, the XSPC Photon has high quality CNC cut aluminium bracket. The bracket can attach directly to a 120mm or 140mm radiator, making installation easy and as compact as possible. Each reservoir/pump combo is hand assembled and pressure tested before sale to ensure reliability.

Model: 5060175588098

Conclusion

By our suggestions above, we hope that you can found water cooling reservoir glass for you.Please don’t forget to share your experience by comment in this post. Thank you!