homestudioreview 
Nowadays, there are so many products of heating return plenum box in the market and you are wondering to choose a best one. You have searched for heating return plenum box in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating return plenum box which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
C-Box HVAC Plenum Ceiling Box 14 x 14 x 14 Round-Connects to Vent Register Diffuser
- Connects a 14″ Round Duct to a 14 x 14 Diffuser or Register Vent.
- Our C-Boxes are built with a 1/2″ flange all the way around the square portion which can be used for attachment or folded over.
- The best way to regulate air flow is to install a manual volume damper in the duct run.
- We also have a full line of ceiling registers and hvac fittings.
- Call us with your hole size and duct size so we can help (707) 999-7712
14 Inches X 14 Inches is the actual size of the square portion. Your diffuser or register will be slightly larger than this.
10" X 20 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 12.5"w X 22.5"h]
- 10″ X 20 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 12.5 X 21.75] – SEE BELOW HOW TO MEASURE A GRILLE
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latches – This model can have the face/door removed
- UNRESTRICTED AIRFLOW For Your HVAC System – Noise Free Components – No Vibrating Louvers Etc.
- QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality – 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home
10″ X 20 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 12.5 X 21.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
20" X 20" Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 22.5 X 21.75]
- 20″ X 20″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 22.5 X 21.75]
- High Quality Solid Stamped Steel – No Sharp Edges
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
20″ X 20″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 22.5 X 21.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
14" X 20 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 16.5 X 21.75]
- 14″ X 20 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 16.5 X 21.75]
- High Quality Solid Stamped Steel – No Sharp Edges
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
14″ X 20 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 16.5 X 21.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
30" X 30" Steel Return Air Filter Grille for 1" Filter – Fixed Hinged – Ceiling Recommended – HVAC Duct Cover – Flat" Stamped Face – White [Outer Dimensions: 32.5 X 31.75]
- 30″ X 30″ Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat” Stamped Face – White [Outer Dimensions: 32.5 X 31.75] – SEE BELOW HOW TO MEASURE A GRILLE
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latches
- UNRESTRICTED AIRFLOW For Your HVAC System – Noise Free Components – No Vibrating Louvers Etc.
- QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality – 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home
30″ X 30″ Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat” Stamped Face – White [Outer Dimensions: 32.5 X 31.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
This model has ½” fin design
This model has fixed hinges so that you cannot completely remove the door for safety.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
36" X 24 Steel Return Air Filter Grille for 1" Filter – Fixed Hinged – Ceiling Recommended – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 38.5 X 25.75]
- 36″ X 24 Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 38.5 X 25.75] – SEE BELOW HOW TO MEASURE A GRILLE
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latches
- UNRESTRICTED AIRFLOW For Your HVAC System – Noise Free Components – No Vibrating Louvers Etc.
- QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality – 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home
36″ X 24 Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 38.5 X 25.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
This model has ½” fin design
This model has fixed hinges so that you cannot completely remove the door for safety.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
C-Box HVAC Plenum Ceiling Box 12 x 12 x 6 Round-Connects to Vent Register Diffuser
- Connects a 6″ Round Duct to a 12 x 12 Diffuser or Register Vent.
- Our C-Boxes are built with a 1/2″ flange all the way around the square portion which can be used for attachment or folded over.
- The best way to regulate air flow is to install a manual volume damper in the duct run.
- We also have a full line of ceiling registers and hvac fittings.
- Call us with your hole size and duct size so we can help (707) 999-7712
12 Inches X 12 Inches is the actual size of the square portion. Your diffuser or register will be slightly larger than this.
36" X 12 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 38.5 X 13.75]
About Product:12"w X 36"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 14.75" Width X 38.75" HeightOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open.High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp EdgesCarefully shrink wrapped with cardboard backing to prevent damage in shipmentPowder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
20" X 14 Steel Return Air Filter Grille for 1" Filter – Fixed Hinged – Ceiling Recommended – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 22.5 X 15.75]
- 20″ X 14 Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 22.5 X 15.75] – SEE BELOW HOW TO MEASURE A GRILLE
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latches
- UNRESTRICTED AIRFLOW For Your HVAC System – Noise Free Components – No Vibrating Louvers Etc.
- QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality – 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home
20″ X 14 Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 22.5 X 15.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
This model has ½” fin design
This model has fixed hinges so that you cannot completely remove the door for safety.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
24" X 12 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – Black [Outer Dimensions: 26.5 X 13.75]
- 24″ X 12 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – Black [Outer Dimensions: 26.5 X 13.75]
- High Quality Solid Stamped Steel – No Sharp Edges
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
24″ X 12 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – Black [Outer Dimensions: 26.5 X 13.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found heating return plenum box for you.Please don’t forget to share your experience by comment in this post. Thank you!
