Which Is The Best Gpu 1050Ti Cooling Block

Feature:
Internal flow channel extrusion forming
Brazing parts into a whole
Leak rate of less than 5X10-6 mbar.l/s parts
Internal fin thickness 0.5MM
Spacing: 1 MM
Processing: vacuum aluminum brazing
Surface treatment: Blue oxidation
Applicable to computer CPU water, industrial inverter driver,laser head cooling, industrial control cabinet cooling ,etc.
Size:40x40mm;

Package Includes:
2 x CPU Water Clooing Block

1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatibilities: EVGA RTX2080TI FTW3

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. The top also features two pre-drilled slots for 3mm LED diodes. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

Specification Description:
Model: HA9010H12F-Z
Voltage: DC 12V
Current: 0.57A
Speed: 3500RPM
Fan interface to the Graphics card: 4 pin female connector
Cooling Fan Size: approx. 85 mm * 12 mm (Diameter * Height)
Mounting holes distance: approx. 40mm * 40mm * 40mm
Certification: CE, TUV, UL

The replacement cooling fan is suitable for MSI:
GTX 1050 Hurricane 2G
GTX 1050 Ti Hurricane 4G
GTX 1060 6GT OC

The Corsair Hydro x series XG7 20-series GPU water block is a total conversion copper water block for your NVIDIA GeForce RTX 2080 Ti graphics card. Precision CNC-milled nickel-plated copper construction and more than 50 high-density cooling fins positioned over the GPU maximize thermal transfer and Surface area, for dramatically lower temperatures and maximum performance. A fully transparent flow path and discrete RGB lighting puts your graphics card on full display, When combined with a Corsair lighting Node Pro or Commander Pro and Corsair CUE software. A full-length aluminum casing and included backplate encloses all your graphics card’s critical components for a total conversion to custom cooling. With pre-applied thermal material, standard G1/4” threads and easy to follow step-by-step instructions, it’s never been easier to unlock the true potential of your NVIDIA GeForce RTX 2080 Ti. Tech Support # 1-888-222-4346 opt # 1. Operating Temperature : 60°C coolant temperature

Description:
2 holes on the side of the cover, the water flows from the side.
0.8 mm copper columns on the copper base.
The water contact area becomes large, so the block can carry more heat from GPU quickly.
The surface flatness is less than 0.01 mm.The base can fit the GPU better, so that it can absorb more heat.The copper base is processed with anti-oxidization technology.
Installation Accessories: Get a 4 mounting screws.
Support 43*43 48*48 53*53 three hole spacing.
Suitable for graphics cards below 1050.

Specification:

Model: T129215SM
Voltage: DC 12V
Current: 0.25AMP
Fan Dimension (L x W x H): approx. 95mm x 95mm x 15mm
Mounting holes distance: approx. 28mm x 28mm x 28mm x 28mm(Center to Center)
Power Connector: 4-Pin Header

Application:

ASUS ROG STRIX-GTX 1050-2G-GAMING
ASUS ROG STRIX-GTX 1050-O2G-GAMING
ASUS ROG STRIX-GTX 1050Ti-O4G-GAMING
ASUS ROG STRIX-GTX 1050Ti-4G-GAMING
ASUS ROG POSEIDON GTX 1080Ti P11G GAMING
ASUS ROG STRIX-RX470-4G-GAMING
ASUS ROG STRIX-RX470-O4G-GAMING
ASUS ROG-STRIX-RX570-O4G-GAMING
ASUS ROG-STRIX-RX570-4G-GAMING
ASUS DUAL-RX580-O8G
ASUS DUAL-RX580-8G
ASUS DUAL-RX580-4G
ASUS DUAL-RX580-O4G
ASUS CERBERUS-GTX 1070Ti-A8G
ASUS CERBERUS-GTX 1070Ti-8G

Package Include:

1* T129215SM brand new fan
1* Thermal Grease
1* Spatula
6 month warranty service

The Bykski MSI GTX 1050Ti Gaming X Full Coverage GPU Water Block  is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! These temperatures allow higher overclocks and extend the lifespan of your card.The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.

Specifications

Compatibility

Parts Included

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it. Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.
Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.
Specifications

Compatibility

Parts Included

Warnings
This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.
Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.

Conclusion

By our suggestions above, we hope that you can found gpu 1050ti cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!