homestudioreview 
Nowadays, there are so many products of flexible gas line hot water heater in the market and you are wondering to choose a best one. You have searched for flexible gas line hot water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings flexible gas line hot water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
15,999 Reviews Scanned
Dormont 41-4142KIT-36B Hot Water Heater Connector Kit, 36 In. Long 3/4 Inlet Diameter
- High BTU gas connector for use with boilers, commercial water heaters, gas meters, gas packs/rooftop HVAC units, furnaces, and tankless water heaters
- Can supply up to 1.5 million BTU (natural gas) or 2.4 million (propane)
- Antimicrobial hot-dipped PVC coating ideal for outdoor use
- 1-Inch OD x 36-Inch length
- Brass adapters 3/4-Inch MIP x FIP
Product Description
High BTU gas connector for use with boilers, commercial water heaters, gas meters, gas packs/rooftop HVAC units, furnaces, and tankless water heaters
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.
Similar items with 4 stars and above
EASTMAN 048280 Gas Water Heater Installation Kit with 24-inch Gas Supply Line, 18-inch Water Connector, Compression Adaptors and Sealing Tape Corrugated Stainless Steel, Yellow
- KIT INCLUDES: Everything you need to connect gas and water supplies to a new or existing gas water heater. Including:
- WATER CONNECTORS: (2) corrugated stainless steel water connectors of 3/4-inch FIP x 3/4-inch FIP x 18-inch Length are included
- GAS CONNECTOR: One (1) corrugated stainless steel gas connector of 1/2-inch MIP x 1/2-inch FIP x 24-inch Length and 1/2-inch OD (Outside Diameter) with yellow epoxy coating included
- ADAPTERS: Two (2) adapters of 7/8-inch compression x 3/4-inch MIP for a solder-free connection included
- TEFLON TAPE: The package consists of a roll of Teflon tape for easy installation
The Eastman 048280 Gas Water Heater Installation Kit is a complete package which consists of 2 corrugated stainless steel flexible water heater connectors with corrosion resistance properties. It also includes a 24-inch gas connector which is made of sturdy corrugated stainless steel and has a yellow epoxy coating. It contains 2 compression adapters for a solder-free connection. The package consists of a roll of sealing Teflon tape which makes installation easy. This kit has a 1-year limited warranty. EASTMAN’s certified appliance connectors are a premium quality that provides a reliable installation every time. This water heater installation kit is used to install a new gas water heater or replace the existing connectors. Use this kit for reliable installation.
Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape
- MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts.
- EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater.
- ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding.
- FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters.
- KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape
magnesium anode rod for water heater
Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.
Besides, Magnesium ions won’t cause any harm to your skin.
Parameters:
Length: 44 inches/ 1100mm
Diameter: 0.8″ /21mm
3/4″NPT thread
Net Weight of the anode rod: 660g
Material: Magnesium
Application:magnesium anode rod for water heater
Packaging List:
Magnesium Anode Rod * 1
1-1/16″ Hex Socket Tool *1
Teflon Sealing Tape * 1 roll
Reliance 9001829005 32-Inch Magnesium Water Heater Anode Rod
Product description
Reliance 9001829-005 Magnsm Adnode Rod
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
LASCO 10-1221 Flexible Coated Gas Water Heater Supply Line, 12-Inch, 1/2-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
- Perect for indoor or outdoor projects
- Premium quality gas hose and fantastic value!
- Yellow safety coated connector
- Bright colored line is easy to use
- Corrugated stainless steel
- Made with durable material to withstand time
- Works as both Natural Gas hose or Propane line
- Great for different types of gas powered projects
- Most commonly used as Gas Water Heater Connector
Product Description
LASCO 10-1221 Flexible Gas Water Heater Connector Line, 1/2-Inch Diameter with 1/2-Inch Fittings, 12-inch Long. 1/2-Inch X 12-Inch Gas Appliance Flex, Flexible Stainless Steel, Safety Coated, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Water Heaters Or Cook Tops.
From the Manufacturer
LASCO 10-1221 Flexible Gas Water Heater Connector Line, 1/2-Inch Diameter with 1/2-Inch Fittings, 12-inch Long. 1/2-Inch X 12-Inch Gas Appliance Flex, Flexible Stainless Steel, Safety Coated, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Water Heaters Or Cook Tops.
Similar items with 4 stars and above
Rheem RTGH-84DVLN Indoor Direct Vent Natural Gas Condensing Tankless Water Heater Low Nox
Product Description
Next Generation Burner Technology Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate UMC-117 remote control and 10 ft. of thermostat wire is included EZ-Lint cable available for high demand applications to connect two thankless units to operate as one Manifold up to 6 units with an optional MIC-6 manifold control board Exclusive! All Rheum models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly High-altitude capability – up to 9,840 ft. elevation above sea level (no chip required) Exclusive! Guardian OFWTM overheat film wrap All Rheum thankless models are third-party efficiency certified by GAMA Continuous hot water, energy saving and compact, space saving design Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System Digital display shows temperature setting and maintenance codes.
From the Manufacturer
Next Generation Burner Technology Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate UMC-117 remote control and 10 ft. of thermostat wire is included EZ-LinkTM cable available for high demand applications to connect two tankless units to operate as one Manifold up to 6 units with an optional MIC-6 manifold control board Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly High-altitude capability – up to 9,840 ft. elevation above sea level (no chip required) Exclusive! Guardian OFWTM overheat film wrap All Rheem tankless models are third-party efficiency certified by GAMA Continuous hot water, energy saving and compact, space saving design Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System Digital display shows temperature setting and maintenance codes
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
Flextron FTGC-YC-34-24P 24 Inch Flexible Epoxy Coated High BTU Gas Line Connector W/ 1 Inch Outer Diameter & 3/4 Inch FIP x 3/4 Inch MIP Fitting, Yellow/Stainless Steel, Excellent Corrosion Resistance
- High BTU Gas Connector with 1″ Outer Diameter
- Yellow/Stainless Steel
- 24″ Long with 3/4″ FIP x 3/4″ MIP Fittings
- Gas Connector is 100% Leak Tested
- Designed and Engineered for Safe, Optimal Flow Rate
- Up to 290K BTU Flow Capacity
- FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
- For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters
Flextron 24 Inch Flexible Epoxy High BTU Gas Line Connector features 1 Inch Outer Diameter & 3/4 Inch Female Iron Pipe (FIP) x 3/4 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC34 series of connectors and is made of Yellow Coated Stainless Steel. Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. FLEXSHIELD Epoxy coating provides extra corrosion protection from accidental contact with common household chemicals and consistent coverage provides protection along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit. Designed and engineered for safe, optimal flow rate.
Specifications:
Similar items with 4 stars and above
EZ-Fluid 15-Inch Braided Flexible Stainless Steel Water Heater Connector for Female Iron Water Pipes Fitting, 3/4-Inch FIP x 3/4-Inch FIP
- Braided Flexible Stainless Steel Flex Connectors for Hot Water Heaters , Tankless Water Heaters and water softener
- Lead-Free and UPC certified
- FIP Female Water Pipes Connection on Both End Fits on All Steel Pipe with NPT Thread
- 12 Inch To 24 Inch Water Heater Water Hose Connectors
- Swivel female threads connection to water heaters, softeners, Tankless Water Heaters and more
Braided Stainless Steel connectors are built with 304 Stainless Steel to withstand corrosion. Great for Hot Water Heaters, Tankless Water Heaters, water softener and more. The Swivel female threads connection design allows for easy installation and support against kinking and cracking. All our Water Connectors are IAPMO/UPC Certified and are Lead Free. ,stainless steel 304 construction provides corrosion resistance ,Easy installation ,Flexible design ,High-quality EPDM ,Working pressure: 125 psi ,AB 1953 compliant: lead free ,IAPMO/UPC certified ,100% leak tested ,Chrome-plated ,California residents see Prop 65 WARNINGS
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found flexible gas line hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
