homestudioreview 
Nowadays, there are so many products of elecrric hot water heater elements in the market and you are wondering to choose a best one. You have searched for elecrric hot water heater elements in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings elecrric hot water heater elements which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
ZERO EWH-01 Electric Water Heater Tune-Up Kit, T-O-D style, Universal for Water Heater
- ZERO EWH-01 Electric Hot Water Heater Repair Kit, T-O-D style,
- Contains (1) TOD Style Upper Thermostat/ZERO KSD203, ASIN: B07CP1H1X6
- Contains (1) TOD Style Lower Thermostat/ZERO KSD200, ASIN: B07CNJNDQY
- Contains (2) Two Heater Elements, 4500w Each, Universal for Water Heaters. 120V ~ 480V
Universal for all type water heater. 120V ~ 480V Contains all the parts needed to repair or renew an electric water heater. Includes 2 each high watt density elements, 1 TOD style lower thermostat with protector #KSD200（https://www.amazon.com/KSD200-Electric-Thermostats-Single-Recognized/dp/B07CNJNDQY/ref=sr_1_16?keywords=AMATACH&qid=1553507108&s=gateway&sr=8-16）, 1 TOD style upper thermostat with protector #KSD203（https://www.amazon.com/KSD203-Heater-Thermostats-Element-Recognized/dp/B07CP1H1X6/ref=sr_1_19?crid=UF8B2F62NY8T&keywords=water+heater+thermostat&qid=1553506518&s=gateway&sprefix=water+heater+th%2Caps%2C325&sr=8-19）.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02142/02143 1500W 120V Screw-In Water Heater Element – High Watt Density
Product Description
Camco RV 1500 Watt Universal Element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. 1500w – 120v.
From the Manufacturer
Camco’s 1500W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Suburban 520900 120 Volt Electric Element
Product Description: Water Heater Element; Screw-In; 1440 Watt; 120 Volt; With Gasket
; Weight: 0.9500; Compatibility: SW12/16 DE/DEM; Wattage: 1440 Watts; Voltage Rating: 120 Volts; Mounting Type: Screw-In; With Gasket: Yes; Quantity: Single
Features
1,440 Watt Element Recovers An Additional 6.0 Gallons Per Hour At Campsites
Limited 90 Day Warranty
Reliance Water Heater 100109136 Electric Water Heater Plumber Repair Pack, Includes 1 Each Upper Thermostat.
Camco 07033 LWD Therm-O-Disc Style Plumber’s Pack Water Heater Repair Kit
Conclusion
By our suggestions above, we hope that you can found elecrric hot water heater elements for you.Please don’t forget to share your experience by comment in this post. Thank you!
