Which Is The Best Dry Replacement Heating Element

Specification:
DC47-00019A Dryer Heating Element:If your dryer is not heated, check that the heat fuse on the dryer housing is blown out before you prepare to replace the heating element. Replacement for numbers: 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533
DC96-00887A Dryer Thermal Fuse:Thermal fuse with bracket, located on the element housing. Thermal cut-off fuse DC96-00887A shuts off the heating element when the dryer overheats. It is a replacement for numbers PS2038484 and AP4207819.
DC47-00016A Dryer Thermal Fuse:The thermal fuse blows to cut off power to the dryer if the dryer overheats. If the thermal fuse has blown, the dryer won’t start. The thermal fuse cannot be reset–if the fuse has blown, it must be replaced. It is a replacement for numbers PS2038533, AP4201899, 35001087, WP35001087.
DC47-00018A Thermal Cut-off fuse: The upper limit of the thermostat is 260 ℉, the lower limit is 210 ℉, and the operating range is 50 ℉. The heating element will be cut off at 260 ℉ and restarted to maintain temperature once the internal temperature drops to 210 ℉.Replacement for numbers: PS2038383, AP4201898 and 35001092.
Material: metal, stainless steel and plastic
Fits Samsung model: DV433ETGJWR, DV395ETPARA, DV395ETPAWR, DV395ETPASU, DV42H5400EW, DV456ETHDSU, DV456EWHDWR, DV456ETHDSU, DV50F9A8EVP, DV338AEB, DV484ETHAWR, DV410AEW, DV328AEG，DV393ETPARA, DV393ETPAWR, DVE45N5300W, DV328AEW, DV45H7000EW, DV328AEW, DV45H7000EW, DV42H5200EP, DV45H7000EW, DV48H7400EP, DV484ETHASU, DV36J4000EW, DV337AEG, 40289032011, 40289032012, DV50F9A6EVW, DV50F9A7EVP, DV50F9A7EVW，DV50F9A8EVW, DVE50M7450P, DVE45N5300F, DV220AEW, DV337AEW, DV350AEP, etc
NOTE:
Before replacing the heating element Unplug the power plug from the wall outlet, remove the corresponding fuse from the fuse box, or flip the corresponding circuit breaker on the breaker panel.

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This heating element assembly (part number DC97-14486A) is for dryers. Heating element assembly DC97-14486A generates the dryer’s heat. Disconnect the power before installing this part. Wear work gloves to protect your hands. For Samsung & Kenmore.

From the Manufacturer

Samsung DC97-14486A Heater Duct Assembly for Dryer. This part works with the following models: Samsung DV210AEW, Samsung DV218AEB, Samsung DV218AEW, Samsung DV337AER, Samsung DV410AEW, Samsung DV419AEU/XAA, Samsung DV328AEG, Samsung DV330AEB, Samsung DV219AEW, Samsung DV330AEW. Genuine Replacement Part.

This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

What you will get
our worry-free 12-month warranty and friendly customer service.
1 x DC47-00019A Dryer Heater Element
1 x Thermal Fuse DC47-00016A
1 x DC96-00887A
1 xThermostat DC47-00018A.
Material: metal, stainless steel and plastic
Fits Samsung model: DV433ETGJWR, DV395ETPARA, DV395ETPAWR, DV395ETPASU, DV42H5400EW, DV456ETHDSU, DV456EWHDWR, DV456ETHDSU, DV50F9A8EVP, DV338AEB, DV484ETHAWR, DV410AEW, DV328AEG，DV393ETPARA, DV393ETPAWR, DVE45N5300W, DV328AEW, DV45H7000EW, DV328AEW, DV45H7000EW, DV42H5200EP, DV45H7000EW, DV48H7400EP, DV484ETHASU, DV36J4000EW, DV337AEG, 40289032011, 40289032012, DV50F9A6EVW, DV50F9A7EVP, DV50F9A7EVW，DV50F9A8EVW, DVE50M7450P, DVE45N5300F, DV220AEW, DV337AEW, DV350AEP, etc
Before replacing the heating element
Unplug the power plug from the wall outlet, remove the corresponding fuse from the fuse box, or flip the corresponding circuit breaker on the breaker panel.
Depending on your model, you may need to remove the cabinet of the dryer to access and replace the heating element.
Check the parts that need to be replaced with the heater assembly. Coil, thermostat, thermal fuse or entire heater assembly. A dryer that does not produce any heat or heat is not enough to dry the clothes can be frustrating.

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC97-14486A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5:To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

From Napco’s Web Site: NAPCO has served the HVAC and appliance industry for over 24 years. NAPCO’s mission is to manufacture proprietary heating elements in the US and supply high quality generic heating elements in conjunction with supporting heater components to the appliance and HVAC service industry. Our focus is heating elements and related accessory parts. We will continue to be the leader in manufacturing USA made replacement parts.

134792700 Dryer Element Replaces: 1482984, AH2349309, AP4456656, EA2349309, and PS2349309

If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective. Designed to fit specific Electrolux manufactured dryer models including Crosley, Frigidaire, Gibson, and Kelvinator.

Specifications:
12-3/4″ Long
5″ Diameter
5/16″ Male Connectors
240 Volt
5500 Watts

PS334313 – Heavy Duty Clothes Dryer Replacement Heating Element for Whirlpool Kenmore Maytag Roper KitchenAid Estate Sears Magic Chef Amana Admiral (*** Includes 279816 Thermostat kit***)

Conclusion

By our suggestions above, we hope that you can found dry replacement heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!