homestudioreview 
Nowadays, there are so many products of cooling fan 120mm 120mm 12v 1.3a in the market and you are wondering to choose a best one. You have searched for cooling fan 120mm 120mm 12v 1.3a in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling fan 120mm 120mm 12v 1.3a which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Wathai Brushless Cooling Blower Fan 120mm x 32mm 12V DC Centrifugal Fan High Airflow
- Package include: 1 Piece fan and mounting screws & nuts
- Rated Voltage:12V 1.0A
- Speed: 3000RPM
- Air flow: 38.5CFM
- Noise:45dBA
- Connecter: XH2.54-2Pin
- Cable Length: 25cm Or 10 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 120mm(L) x 120mm(W) x 32mm(H) / 4.72×4.72×1.26 in. per fan
Package include: 1 Piece fan and mounting screws & nuts
Size:120x120x32mm
Rated Voltage: 12V
Rated Current: 1.0A
Connecter: XH2.54-2Pin
Power: 12.3W
Speed: 3000RPM
Air flow:38.5CFM
Noise:45dBA
Bearing type: Sleeve Bearing
Cable Length: 25cm Or 10 inches
Life: 35000 hours
Weight: 170g/pcs or 6 oz
UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
BASICAL INFORMATION
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
ELECTRICAL PROTECTION
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
RGB Cooling Fans for Computer Case 200mm Colorful Kit LED PC Computer Fan，2 Pack
- 366 Colors Lighting Modes：Play lights with 366 colors to bring the right atmosphere to your system by the remote,easy controlle the light mode,speed,color,bright.RGB Fans 200mm for Computer Case 366 Adjustable Color LED PC Computer Fan with Ccontroller 2 Pack
- Quiet Fan Design: 200mm fan with unique 11 blades engineered for maximizing airflow while minimizing noise. fan speed at 800(+/-10%) RPM at low 20dB noise level and deliver an air flow of up to 95CFM.
- Rubber Pads & Hydraulic Bearing:Equipped with rubber pads and hydraulic bearing, not only greatly reduce running noise 80% but also protect coverage for all corners.
- Built in 36 LED Light Bulb Strip:Equipped with 36 high-quality LED light bulbs in each case fan, durable and stable, lifespan up to 20,000 Hours. It won’t be ‘’half shining’’ just like others.
- Easy to Install: Fix the fans one by one onto your PC case with screws that come with, connect them altogether to the controller hub (included)at the appointed interfaces in order(from 1 to 2). And you are ready to go for the gorgeous lighting show.
2 packs 200mm RGB computer case fans kit with 366 modes in one remote and reinforced quiet fan blade design.
Friendly reminder:
Please connect these 2 fans to interface show“fan 1 and 2”,if more fans need ,then connect to“fan 3,4,5,6 “ interface in order.
Otherwise, it won’t be working like normally RGB fans .
Fan 1-6: 6 pin port, please connecting in sequence from FAN1 to FAN6.
Connect the fan to the controller with a 6 pin connector, connect the controller to the motherboard with a 4 pin connector.
The LED connector is for LED strip Only.
Specification:
LED Color: RGB
Product Diameter: 200mm*200mm*25mm
Fan rated voltage: DC 12V
LED rated voltage : DC 5V;
Weight: 870g
Rated Power: 4.2W
Rated Current: 0.31A(fan) / 1.3A(LED)
Airflow: 95CFM
Fan Speed: 800(+/-10%) RPM
Sound Level:Max 25dB
Connector: 6 pin connector
Bearing Type: Hydraulic Bearing
Lifetime: 20000Hrs
Controller Connector:8*6PIN(for fan), 4*4PIN(for LED strip)
Guarantee:
One year warranty. If the item you received is defective in any way or you purchased the wrong item or any other questions, please contact us.We will help you in 24 hours.
Package Includes:
2 x 200mm LED RGB Case Fan
8 x Mounting Screws
1 x RGB fans hub
1 x Remote
1 x USER Manual
Conclusion
By our suggestions above, we hope that you can found cooling fan 120mm 120mm 12v 1.3a for you.Please don’t forget to share your experience by comment in this post. Thank you!
