homestudioreview 
Nowadays, there are so many products of coolerguys dual 92mm fan cooling kit in the market and you are wondering to choose a best one. You have searched for coolerguys dual 92mm fan cooling kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings coolerguys dual 92mm fan cooling kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets, AV, and Components (Dual 92mm, Thermal Plastic)
- (2) Coolerguys 92mm Ultra Quiet Low Speed Dual Ball Fan
- (1) 110v AC to 12v DC Power Supply with 4 Pin Molex (2000mA)
- (1) Black Acrylic Fan bracket (120 x 225 x 4mm)
- (1) Preset Thermal Controller On @ 86 Off @ 81
- (4) Black 92mm fan grill and screws to attach grills and bracket
GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Coolerguys Dual 120mm Fan kit with pre-Set Thermal Controller CG-1202-P
- Fan, Power and all parts needed to complete the kit
- 2 Ultra quiet 120mm fans
- 500ma 100-240v AC power supply will work worldwide with correct plug
- Meant to cool receivers, DVRs, consoles, computer or any other device in your cabinet or closet
- 3 year replacement warranty when purchased from Coolerguys
CabCool 802 Lite Dual 80mm Fan Cooling Kit for Cabinet & Home Theaters
- Not compatible with any of our thermal controllers, nothing 5v or “Lite” is
- Fan(s) can be set to blow into or out of the cabinet depending on your needs.
- Complete kit for a dual fan unit (8.25″ x 4.25″ x 1.25″) that will quietly cool your cabinet.
- Includes everything necessary for an easy install
- As always all Coolerguys made parts come with 3 year replacement warranty
This kit uses fans that are not compatible with any of our thermal control units no matter what you purchase, if you need thermal control please buy a kit that comes with one, anything labeled as “Lite” or “5v” is not compatible
We had a small number of kits go out in late December / early January where the fans were wired incorrectly, when we found out we pulled all of our inventory from Amazon, we don’t know how many and who got the incorrect fans so if your kit doesn’t work please contact us for a free replacement, also know all our kits still contain a 3 year warranty
This Lite version of our Cabcool cooling kits is a great selection if you just want a no nonsense easy to install kit to keep your stuff cool.
We paired our silent fans with a wall wart style 2 prong ac adapter so you can power it from a standard wall socket or any entertainment device that has an outlet
A quiet stand alone system, perfect to go on when your AV amplifier goes on, or just run all the time.
This is a complete kit for a dual fan unit (8.25″ x 4.25″ x 1.25″) that will quietly cool your cabinet or multimedia center.
Can be mounted on any side of a cabinet, where room permits, by cutting a hole approximately 3/4″ smaller on all sides of the outside bracket.
Insert completed cooler assembly in hole and attach to cabinet with appropriate screws.
Fans can be set to blow into or out of the cabinet depending on your needs.
Kit includes
(2) Coolerguys Quiet 80x80x25mm fan
(1) AC to DC PSU with 4 Pin Molex (500mA)
(1) Black Metal Fan bracket (8.00″ x 4.25″ x .125″)
(4) Black 80mm fan grill
Fan Screws to attach grill(s) /1/2″ black Cabinet screw(s)
All necessary screws, cables, and fasteners to complete the unit are included
Completed dimensions: 8.00″ x 4.25″ x 1.25″ / Cut out size: 6.9″ x 3.26″ (175 x 83mm)
Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets, AV, and Components (Single 80mm, Metal)
- (1) Coolerguys 80x25mm Ultra Quiet Low Speed Dual Ball Fans CG08025L12B2-3Y
- (1) Thermal controller (pre-set non-adjustable On @ 86F / Off @ 80.6F
- All necessary screws, cables, and fasteners to complete the unit.
- Completed dimensions: 8.00″ x 4.25″
- DBA: 17
Coolerguys Single 120mm Fan kit with pre-Set Thermal Controller CG-1201-P
- Fan, Power and all parts needed to complete the kit
- Ultra quiet 120mm fan
- 500ma 100-240v AC power supply will work worldwide with correct plug
- Meant to cool receivers, DVRs, consoles, computer or any other device in your cabinet or closet
- 3 year replacement warranty when purchased from Coolerguys
Coolerguys Single 120mm fan kit with pre-set thermal controller CG-1201-P
Single 120mm(6.25" x 6.25") fan kit for cooling your cabinet or multimedia center.
Designed for mounting on any side of a cabinet, where room permits, by cutting a rectangular hole approximately 5" x 5" (130 x 130mm). Insert completed cooler assembly in hole and attach to cabinet with appropriate screws. Fans can be set to blow into or out of the cabinet depending on your needs.
Our Pro Series bracket is made of high quality "Black Powder Coated Metal "
Fan is 12V DC and powered by our 110-240 AC to 12v DC Power Supply with 4 Pin Molex (500mA) (included)
Cooling Unit includes the following:
(1) 110-240V AC to 12v DC Power Supply with 4 Pin Molex (500mA)
(1) Ultra quiet 120mm Fans
(1) Black Powder Coated Metal Fan bracket (6.25" x 6.25" x .125")
(1) Coolerguys Thermal Controller
(1) Black 120mm Honeycomb Mesh Fan Grills
(1) Black 120mm Fan Grills
(4) Fan nuts and bolts
Pack – 4" Nylon Multi-Purpose Tie Black
(4) #6 – 1/2" black Cabinet screw
All necessary screws, cables, and fasteners to complete the unit.
Completed dimensions: 6.25 x 6.25”.
Cabinet Cutout size: 5" x 5" (130 x 130mm).
Fan Specs:
1200 RPM
Operation Voltage: 6.5~13.8 Volts
Input current: 0.10 Amp Max
Operation temperature: -10 to +65 C
Storage temperature: -40 to +70 C
RPM: 1200 +/- 10%
CFM: 47
dB: 20
This is a kit and some assembly is required.
PartsSquare 175-185 Degree Electric Cooling Fan Thermostat Kit Temp Sensor Temperature Switch 40 50 60 amp RELAY KIT
- Replacement for : 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- New 175 – 185 degree electric fan thermostat relay switch kit for your cooling system, It is a 3/8″ pipe thread.
- This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- This kit is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system.
- High Quality Replacement Part, have no-worry 12 months warranty.
AC Infinity RACK ROOF FAN KIT, Quiet Dual-Fans with Speed Controller, for cooling AV, Home Theater, Network 19” Racks
- A quiet fan kit designed for standard 19” racks, to be mounted on the roof or to replace existing fans.
- Features a speed controller utilizing PWM which can control the fan’s speed without generating noise.
- Compatible with CLOUDPLATE series rack fans and can be linked to share the same programming.
- Heavy-Duty steel construction with spiral fan guards, mounting hardware, and power adapter.
- Size: Standard 120mm Rack Fans | Fans: 2 | Airflow 200 CFM | Noise: 26 dBA | Bearings: Dual Ball
Product Details
A quiet dual-fan kit designed to be mounted onto the roof of standard 19-inch racks to provide cooling. Containing standard 120mm fans, it can also replace existing fans that may been included with your rack. Maintaining an optimal temperature for rack-mount equipment prevents overheating, ensures constant performance, and extends their lifespan. Features an inline speed controller utilizing PWM-technology. The fans are housed in heavy-duty cold rolled steel with spiral fan guards. Fans contain dual-ball bearings rated at 67,000 hours, and are certified by CE and RoHS. This complete kit includes two fans, an inline speed controller, rack-roof mounting screws, corded 6-ft power adapter, and user’s manual.
Precise Speed Controller
The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features a DC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan’s motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight speed options are available with power switch, and backup memory.
Performance and Applications
This rack roof fan kit contains standard 120mm fans, enabling it to be compatible with most standard 19” racks. With a noise level of 26 dBA, the fan system can be used for environments where low or minimal noise is required such as home theater, studio, DJ, and audio video racks. A max airflow rating of 200 CFM will provide sufficient cooling to server, network, IT and equipment racks requiring high airflow.
175-185 Degree Electric Cooling Fan Thermostat Kit Temperature Sensor Temperature Switch 40 50 60 AMP Relay Kit
- 【COMPATIBLE VEHICLES】 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- 【DIRECT FIT & EASY INSTALLATION】This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- 【Premium Quality】New 175-185 degree electric fan thermostat relay switch kit for your cooling system, sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V.
- 【WORKING】This kit is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system.
- 【NOTE】If you get any problems with our this Electric Cooling Fan Thermostat Kit, please contact us in the first time, we will response within 12 working hours.
Coolerguys Anti-Vibration Gaskets (92mm)
Stop case vibrations, just install inbetween your fan and the chassis or cabinet to help!
Easy and long lasting
Conclusion
By our suggestions above, we hope that you can found coolerguys dual 92mm fan cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
