Top 10 Brasscraft Gas Connector Lowes

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Product Description

LASCO 10-1215 LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings. For indoor or outdoor use. Yellow safty coating – corrugated stainless steel. For use with natural gas or propane. Connect to gas dryers! Larsen Supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. We pride ourselves on service, selection and support! All Lasco merchandise if warranted to be free of manufacturing defects. Please revert to retail place of purchase for resolution of any possible plumbing questions, warranty or defective part replacement.

From the Manufacturer

LASCO 10-1215 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 72-Inch Long. 3/8-Inch X 72-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.

Product Description

Brass Craft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

From the Manufacturer

BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Connect your gas dryer, water heater or Cooktop with this Gas dryer and water heater Flex-Line (1/2 in. Od x 48 in. (1/2 in. Fip x 1/2 in. Mip) from BrassCraft. The connector features a corrosion-resistant coating to protect from harsh cleaning and Plumbing repair products and can be used indoors or outdoors. The connector supports appliances up to 60, 500 btu.

Product Description

SD Series, 60″, Pro-Coat Epoxy Coated, Stainless Steel, Gas Appliance Connector, 3/8″ I.D. x 1/2″ O.D. Tube, 1/2″ Female Pipe Thread x 1/2″ Male Pipe Thread, Product Comes in Re-Sealable Zip lock Bags, AGA Approved & IAS Design Certified For Indoor/Outdoor Use, Recommended For Forced Air Heaters, Gas Ranges, Furnaces, & Water Heaters.

From the Manufacturer

Brasscraft CSSD54-60 Gas Dryer and Water Heater Flex-Lines .

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.

Duratrac gas connectors are CSA certified to ANSI Z21.24 CSA/CGA 6.10 Standard connectors for gas appliance and ANSI Z21.75 CSA/CGA 6.27 Standard Connectors for outdoor gas appliance and manufactured homes. The corrosion resistant yellow coating protects the product from exposure from harsh weather and certain chemicals. See BTU chart for rating.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Brasscraft Gas Connector Lowes, eg:

• What are Top 10 Brasscraft Gas Connector Lowes for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Brasscraft Gas Connector Lowes to buy?
• What are Top Rated Brasscraft Gas Connector Lowes to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Brasscraft Gas Connector Lowes?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Brasscraft Gas Connector Lowes.
• Before deciding to buy any Brasscraft Gas Connector Lowes, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Brasscraft Gas Connector Lowes and What you should consider when buying the Brasscraft Gas Connector Lowes and Where to Buy or Purchase the Brasscraft Gas Connector Lowes. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Brasscraft Gas Connector Lowes of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Brasscraft Gas Connector Lowes.