Top 10 Alfa Romeo Stelvio Safety Ratings

Fit for: ALFA ROMEO Giulia Mito Stelvio

Dear customers, our seat cover are customized according to the car model.
Please tell us the order number (car brand, car model and car year ) after purchase.
We will customize the exclusive seat cover for you. Thank you.

1.Gross Weight: 5-6kgs/set.
2.This product uses natural environmental PU leather, comfortable, smooth and delicate feeling, can be used to clean water and dry.
3.This product can protect the car seats, and keep the original car and the car seat is always the same.
4.Four Seasons General.Product ride comfortable and soft, suitable for year round use.
5.3D model design, perfectly close to the seat, no shifting,close to waist line,relieve fatigue.
6.if you have a car different model,plesae feel free to contact us and show us the car photo, then we will reply and help you purchase a correct seat cover.

After Service
Dear friends: When you receive the item, if items have quality problems or other questions, please do not panic, we will consult with you to your final will give you a satisfactory answer.

Unconditional Return Policy
Dear friends: If you can not accept our program, you need to get a full refund, you accept the project within 14 days contact us, we will give you an item return address, When we receive your return project, we will immediately refund your money, Thank you!

Controversy: Have any questions, please contact us, do not open the dispute, because we have the ability to help you solve all the problems.

Product Description

– Maximum Power Output 2 x 2000W – Bridgeable RMS Power @ 4 Ohms: 1x4000W – 2 Channel Bridgeable MOSFET Amplifier – Frequency Response 20 Hz-50kHz (±3dB) – Output Power @ 14.4v DC, 50Hz – 2 Ohm Stable – MOSFET Power Supply – PWM ( Pulse-Width-Modulation ) System – Glass Epoxy PCB – Silver RCA Inputs – Custom Terminal Block for Speaker Connection – Thermal / Overload / Short Circuit Protection – Input Impedance: 47K Ohms – Soft Turn On/ Off – Advanced Protection Circuitry – S/N Ratio: >90dB – Dimensions:10.24″W x 2.21″H x 16.14″L

From the Manufacturer

Advanced Protection Circuitry view larger

Power Series Amplifiers view larger

System Application Diagram view larger

The Strong and not so Silent Type

Custom Terminal Block for Speaker Connections view larger

Power Amplifiers

The Pyle Power Series Amplifiers will provide your audio setup with a powerful new sound. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrow’s advanced sound technology that outperforms all other amps in its class.

This lineup of Pyle Power amps raises the bar when it comes to true sound quality. Get that sound you’ve been looking for with crisp music reproduction for any mobile audio environment.

Sound Specialization

These high-efficiency amplifiers host impressive power output wattage and are where form and function meet. Enjoy sound and performance enhancing features like Ohm specific stability, Mosfet power supply, PWM (Pulse-Width-Modulation) System, Glass Epoxy PCB, silver RCA inputs, custom terminal blocks for speaker connections, strong frequency response, and input impedance rates along with plenty more features that make the Pyle Power Series Amplifiers stronger than the competition.

Intelligent Design

Safety features include power and protection LED indicator; soft turn-on/off, thermal, overload and speaker-short protection. LED Indicator shows when the amplifier is powered up normally and when your system is experiencing a protection fault.

Pump it Up

Take advantage of the Bass EQ Boost and turn it up. Make adjustments to the Bass EQ settings until you achieve that extra amount of kick you’ve been waiting for.

Strong Sound – Powerful Style

The jet-black design leaves a clean finish on the fortified aluminum heat-sink. The stream-lined and high-tech appearance will definitely add some muscle to your audio.

Total Audio Control

Once you’re connected, customize and adjust your listening experience to your liking with the amplifier’s control center. You can personalize and fine-tune settings like:

• Level (Gain) Control – These are basically volume controls. This will allow you to adjust the incoming signal to the amplifier so that it works well with your headunit or to match the level of other amplifiers in your system.
• Phase – Allows you to change the relative time that the waveform meets your ear. With standard subwoofer installations where the subwoofer is behind you, the phase should generally be at O. When subwoofers or woofers are in the kick panels or door panels, an adjustment is useful in delaying the timing of the wave meeting your ear.
• High-Pass Filter – The High Pass crossover is used for sending midrange and high frequency information to a particular speaker. Activate the High Pass crossover if you intend to drive satellite or coaxial speakers in the system along with subwoofers driven by the amplifier’s channels. Even if your system does not include subwoofers, it may be helpful to activate the High Pass with smaller speakers to protect them from low frequency information to achieve better sound.
• Low-Pass Filter – Filters high frequencies out of the music and improves efficiency and sound quality by allowing only the low frequencies to pass to the subwoofer. Sends only low frequency information to particular speakers. Low Pass crossover activation is usually desired if you intend to power subwoofers.
• Bass EQ – Variable from a range of decibel adjustments, this feature regulates the impact of your bass kick. You’ll have manual control over balancing and correcting the frequency range of a given sound.
• Crossover Switch – Basically acts as a filter and limits selected frequencies going to a subwoofer, which gradually reduce frequency signal strength. Routes output of the Low Pass or the output of the High Pass filters, or ‘Full’ to the power amplifier.

*Please refer to table below for amplifier specific information and adjustment options.

Speaker Output Connections

Connect right and left speaker wire to corresponding speaker output terminals. Be sure to correctly connect the selected speaker wires to their respected speaker terminal, this includes both positive and negative wiring. Improper installation/wiring will result in the speaker cones to move out of phase which can cause bass cancellation.

Input Connections

These amplifiers have inputs for Low Level input connections. The Low Level signal is carried through RCA connection cables.

Additional Features

• Maximum Power Output 2 x 2000W
• Bridgeable RMS Power @ 4 Ohms: 1x4000W
• 2 Channel Bridgeable MOSFET Amplifier
• Frequency Response 20 Hz-50kHz (±3dB)
• Output Power @ 14.4v DC, 50Hz
• 2 Ohm Stable
• MOSFET Power Supply
• PWM ( Pulse-Width-Modulation ) System
• Glass Epoxy PCB
• Silver RCA Inputs
• Custom Terminal Block for Speaker Connection
• Thermal / Overload / Short Circuit Protection
• Input Impedance: 47K Ohms
• Soft Turn On/ Off
• Advanced Protection Circuitry
• S/N Ratio: >90dB
• Dimensions: 10.24”W x 2.21”H x 16.14”L

Which Pyle Power Series Amplifier is Right For You?

	PLA2378	PLA2678 Currently Viewing	PLA2978	PLA4278	PLA4478	PLA1800	PLA3100D	PLA4600D
Channels	2	2	2	4	4	1	1	1
Watt Power Output @ 4 Ohms	2 x 1000	2 x 2000	2 x 2500	4 x 500	4 x 1000	1 x 300	1 x 900	1 x 1200
Watt Power Output @ 2 Ohms	–	–	–	–	–	1 x 500	1 x 1200	1 x 1800
Watt Power Output @ 1 Ohms	–	–	–	–	–	1 x 700	1 x 1600	1 x 2400
Bridged @ 4 Ohms	1 x 2000	1 x 4000	1 x 5000	2 x 1000	2 x 2000	–	–	–
Maximum Output Watt Power	2000	4000	5000	2000	4000	2400	3100	4600
Low Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	60Hz – 200Hz	60Hz – 200Hz	40Hz – 300Hz	40Hz – 150Hz	40Hz – 150Hz
High Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	15Hz – 250Hz	15Hz – 250Hz	–	–	–
Subsonic Filter	–	–	–	–	–	10Hz – 40 Hz	15Hz – 55Hz	15Hz – 55Hz
Fuse Size	2 x 15A	2 x 40A	4 x 30A	2 x 25A	2 x 40A	2 x 30A	4 x 25A	4 x 30A

Please make sure your car model and the year is the same as list show

Please make sure your car model and the year is the same as list show

ToughPro provides the highest quality custom fit automobile floor mats designed specifically to meet the toughest climate conditions from the everyday drive to the gritty work site.
These all season floor mats can be custom cut to fit any car, SUV, or truck sold through ToughPro’s state of the art blade cutting platform.
Our computerized system is able to find a floor mat template for almost any vehicle sold within the last 15 years.

Where most car mats will defend against liquids and debris, ToughPro has been designed with a unique interlocking hexagon soccer cell pattern with deep grooves and ridges that will trap moisture, preventing any spill over.
By confining the mess to our individual cells, ToughPro is able to adapt to any terrain allowing its users to travel with complete confidence.

ToughPro uses a distinct blend rubber material, temperature resistant rubber composite that has industry grade durability.
Precision cut nibs on the bottom of the mat ensure no slippage yet easy installation and cleaning.

Here at ToughPro we’re so confident in our product, each car mat comes with a lifetime guarantee at no additional cost.
With quality material, custom template, price, and an industry leading confidence, it is no wonder ToughPro is poised to shake the market with it’s quality mats for years to come!

LifeTime Warranty
Made in USA
Cargo Mat is available

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Alfa Romeo Stelvio Safety Ratings, eg:

• What are Top 10 Alfa Romeo Stelvio Safety Ratings for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Alfa Romeo Stelvio Safety Ratings to buy?
• What are Top Rated Alfa Romeo Stelvio Safety Ratings to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Alfa Romeo Stelvio Safety Ratings?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Alfa Romeo Stelvio Safety Ratings.
• Before deciding to buy any Alfa Romeo Stelvio Safety Ratings, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Alfa Romeo Stelvio Safety Ratings and What you should consider when buying the Alfa Romeo Stelvio Safety Ratings and Where to Buy or Purchase the Alfa Romeo Stelvio Safety Ratings. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Alfa Romeo Stelvio Safety Ratings of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Alfa Romeo Stelvio Safety Ratings.