Best Water Cooling Liquid Purple

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

The LC240E RGB incorporates Cooler Master’s Dual Chamber Pump, 120mm Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you’re building new or just upgrading, it’s easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.

EC6 ReColour is a concentrated dye for PC water cooling. Each 30ml bottle of ReColour can dye up to 5 litres of coolant at our recommended ratio of 6ml per litre. EC6 ReColour Dyes provide vibrant, stable and long lasting colours. Use EC6 ReColour to iIncrease the intensity of the dye in your coolant, change the colour of white or clear coolant, or create custom colours. EC6 ReColour can be added to EC6 Clear or EC6 Opaque White coolant. Mix at a ratio of 6ml per litre to match XSPC pre-mixed coolant colours. Does not contain ethylene glycol or a bittering agent.

Model: 5060175589422

Koolance 702 series coolant is used by many industries requiring a high performance, low-toxicity, reliable coolant with corrosion and biological inhibitors. A high quality coolant is extremely important for addressing dissimilar metals and biologic growth (bacterial and algae) long-term. Koolance liquids will not clog components and can typically be used for 2-3 years before replacement is recommended. (Coolant shelf life is 3 years.)

This container includes 700ml (24 fl oz) of prediluted coolant and can function as a squirt bottle for convenient reservoir filling. It’s recommended to replace the coolant at least every 2-3 years, or immediately if there is any change in color or clarity.

The freezing point is -15°C (5°F). This coolant has been tested with the following materials:

• Metals: copper, brass, aluminum, stainless steel, nickel, steel, gold, lead
• Plastics: ABS, PA66, PBT, PE, PEI, PES, PETG, PMMA, POM, PP, PPE, PPO, PPS, PTFE, PU, PVC
• Rubber: EPDM

NOTE: Not recommended for polycarbonate plastics or other PC-based plastics.

Additional Specifications

• Color: Yellow
• Volume: 700mL (23.67 fl oz)
• Freezing Point: -15°C (5ºF)
• Electrical Conductivity (µS/cm): 2500
• UV Reactive: Yellow
• Specific Gravity @20°C: 1.03
• Viscosity @20°C (cP): 2.3

Introducing the next level in PC liquid cooling, the Thermaltake C1000 Opaque Vivid Color Coolant Series. Made in Germany, the C1000 Opaque coolants are a non-transparent, virtually odorless, biodegradable, high performance PC liquid. Offering ideal protection for PC cooling systems using copper, nickel, brass or aluminum materials, the C1000 also supports anti-rust, anti-freezing and water scale prevention. Take control of colorizing any system from seven vivid colors: red, green, blue, orange, yellow, white, and purple to brighten up any build with Thermaltake.

Build a Better System Environment – You deserve something better! Throw away your CPU fan and put an advanced liquid cooler into your system. Iceberg series all – in – one liquid cooler, provides your system a much silent and better cooling performance. Secure your system without any harm from over heating.

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

Blue transparent coolant for PC water-cooling, offering superb protection for copper, nickel, brass, and aluminum. Thermaltake T1000 transparent coolant series is designed with TT latest Formula to be used as anti-corrosion protection fluid and heat-transfer medium for PC water-cooling. With transparent colors, T1000 allows users to create unique colors by adding TT Premium Concentrate. The new formula provides T1000 coolant series with color stability and low viscosity that enables effective flow. Thermaltake T1000 coolant series encourages users to create your own colors for your system!

EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting color stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors – thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.

With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and thermal efficiency with emphasis on color stability. The key feature of the new coolant formula is that it is not sedimenting after long hours of inactivity of the cooling loop. Designed specifically for computer liquid cooling systems, the EK-CryoFuel offers a 1-year shelf life from date of bottling.

• contains corrosion and scale inhibitors
• contains biological growth inhibitors
• good heat transfer characteristics
• color pigments don’t leave residue
• high specific heat
• chemically stable
• low viscosity
• non-toxic

EK-CryoFuel contains synergistic corrosion inhibitors to protect metals commonly found in computer liquid cooling systems. It has been tested in accordance with BS5117 (ASTM D1384) and found to meet corrosion standards for copper, brass, aluminum and stainless steel. This coolant also contains scale and biological inhibitors to help prevent fouling – thus promoting long operational life and high thermal efficiency, providing best value/performance ratio.

Does not contain ethylene glycol or a bittering agent.

Model: 3831109880340

EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting color stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors – thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.

With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and thermal efficiency with emphasis on color stability. The key feature of the new coolant formula is that it is not sedimenting after long hours of inactivity of the cooling loop. Designed specifically for computer liquid cooling systems, the EK-CryoFuel offers a 1-year shelf life from date of bottling.

This 250mL concentrate is to be mixed in 750mL distilled water to form 1L of ready-to-use coolant.

• contains corrosion and scale inhibitors
• contains biological growth inhibitors
• good heat transfer characteristics
• color pigments don’t leave residue
• high specific heat
• chemically stable
• low viscosity
• non-toxic

EK-CryoFuel contains synergistic corrosion inhibitors to protect metals commonly found in computer liquid cooling systems. It has been tested in accordance with BS5117 (ASTM D1384) and found to meet corrosion standards for copper, brass, aluminum and stainless steel. This coolant also contains scale and biological inhibitors to help prevent fouling – thus promoting long operational life and high thermal efficiency, providing best value/performance ratio.

Does not contain ethylene glycol or a bittering agent.

Model: 3831109880272

Conclusion

By our suggestions above, we hope that you can found water cooling liquid purple for you.Please don’t forget to share your experience by comment in this post. Thank you!