homestudioreview Finding your suitable readers for parts washer solvent pumps is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for parts washer solvent pumps including detail information and customer reviews. Let’s find out which is your favorite one.
756 reviews analysed
Little Giant PE-2YSA 518550 Submersible Parts Washer Pump, Black
Black Bull PWP20 Parts Washer Pump
Parts washer pump which is 20 gallon with a universal design, recirculates 4.4 GPM of solvent submersible. Uses only 120 Volt / 60 Hertz 0.23 Ampere. Also provided with replacement pump for 20 gallon parts washer.
Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1′ – Parts Washer Pump, 6′ Power Cord No Plug (502020)
Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1′ – Parts Washer Pump, 6′ Power Cord No Plug (502020)Specialty PumpsDesigned for submerged use only, this pump is intended for use in UL listed parts cleaners. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1′ – Parts Washer Pump, 6′ Power Cord No Plug (502020) Features: 1/2″ MNPT Conduit Fitting 1/40 HP Oil filled motor 300 GPH @ 1′ Maximum flow rate Intermittent Liquid Temp. to 120F Cast aluminum housing Hooded intake 1/4″ MNPT discharge Nylon volute & Impeller Viton Shaft Seal Nylon Screen Thermal overload protectionLittle Giant 2E-NYS 1/40 HP, 300 GPH @ 1′ – Parts Washer Pump, 6′ Power Cord No Plug (502020) Specification: Flow: 300 GPH @ 1′ of Head Cord Lenght: 6′ Shut Off: 11.8 Voltage: 115 Hertz: 60 Amps: 1.7 Weight: 4.83*This pump is intended to pump unheated, metal parts cleaning solvent, (classified as PJQU as described in the Gas and Oil Equipment Directory).
Black Bull PWP40 Parts Washer Pump
Parts washer pump which is 40 gallon with a universal design, recirculates 4.4 GPM of solvent submersible. Uses only 120 Volt / 60 Hertz 0.23 Ampere. Replacement pump for 40 gallon parts washer.
Flood Type Coolant Replacement Pump
For use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent that is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.”
Red Sun Parts Washer 3.5 Gallon Capacity Tank Cabinet Electric Solvent Pump&Brush Protable Automotive Parts Cleaner for Wheel Bearings, Gears, and carburetors (Blue)
- FLOW-THRU PARTS BRUSH WITH TUBE+180 DEGREE ROATING NOZZLE: Designed for circulating washing. Heavy-Duty grooved handle. 28-Inch (71-Centimeters) Long Tube. The flexible metal nozzle is ideally used to guide the cleaning agent to the parts which need to be cleaned
- HIGH FLOW PUMP: High flow parts washers pump, ability to clean all types of parts efficiently and quickly, such as screws, bearings, gaskets, suitable for all kinds of working environment, such as auto repair shop, the construction site
- STURDY STEEL+ANTI-RUST COATING: Redsun parts washer cleaner were made of sturdy steel, the powder coating can resist rust and corrosion.However, we do not recommend the use of volatile solvents such as gasoline
- LIGHTWEIGHT AND PROTABLE: This parts washer is light weight enough. That you can easily pack it up and move the parts washer from job site to job site or from your shop to your garage.
- PERFORMANCE GUARANTEE: You can get our performance guarantee. If you have any problems with the parts you need, simply contact customer service for a replacement or refund
A professional parts washer can increase the efficiency of cleaning.
Redsun specializes in the production of industrial tools for many years.
During these years’ period, we always concentrating on the development and production of highly efficient tools.
Redsun 3.5 gallon parts washer is probable and easy to carry.
SPECIFICATION
AMPS:0.23
Tankcapacity:5 Gallon
Solventcapacity:3-1/2Gallon
Pump Capacity: 5-1/4 GPM (19.8L/min)
Parts washer circulation flow: 0.71~ 0.87GPM (2.7-3.3 L/min)
Made of durable welding steel, powder coating,rust
Electrical requirement: 110V-120V,60Hz;220-240V,50Hz
Automatically cover when parts washers reaches a certain temperature
ACI 199600 Universal Washer Pump Kit
Designed to fit a variety of applications.
Little Giant 1-YS 1/150 HP, 205 GPH (13LPM), 230V-Parts Washer Pump, (1.8m) Power Cord No Plug (501036)
1-YS Features: -Submersible pump for use with Stoddard solvent and deodorized kerosene submerged parts washer applications only.-0.5” MNPT master builders conduit fitting.-Oil filled motor.-Intermittent liquid temp to 120F.-Cast aluminum housing.-0.25” MNPT Discharge.-Nylon volute.-Nylon impeller.-Viton double lip shaft seal.-Polyethylene screen.-Thermal overload protection.-Parts washer pump, no plug.-Export pump.-For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory.-These refined petroleum distillates are free from tendency to heat spontaneously.-They have a closed cup flash point not lower than 100 F.-Engine HP: 1/150.-Flow 205 GPH @ 12” of Head.-Shut off: 88.8”. Specifications: -Voltage: 230V.-Hertz: 50/60Hz.-Amperes: 0.6Amps.-Wattage: 70W. Dimensions: -Cord length: 72”.-4.25” H x 4.6” W x 4.12” D, 3.5 lbs.
Oriflo With Hose (OR101H) Flow-Thru Parts Washer Brush (10.25 Inches, 4.25 Ounces), 28 Inch Hose Connects To Parts Washer Nozzle
- This is a professional tool, made by the company that invented the modern, flow-thru parts cleaning brush.
- Hose fits .50″ – .60″ nozzle on circulating solvent parts washers.
- Bullet-shaped tip of stiff Trialoy polyester filament resists mushrooming. Good for both petroleum- or water-based cleaning solutions.
- This brush ships as original equipment with most of the parts washers made in the world.
- Made in the USA. Only the filament is imported.
Conclusion
By our suggestions above, we hope that you can found Parts Washer Solvent Pumps for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Parts Washer Solvent Pumps, eg:
- What are Top 10 Parts Washer Solvent Pumps for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Parts Washer Solvent Pumps to buy?
- What are Top Rated Parts Washer Solvent Pumps to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Parts Washer Solvent Pumps?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Parts Washer Solvent Pumps.
- Before deciding to buy any Parts Washer Solvent Pumps, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Parts Washer Solvent Pumps and What you should consider when buying the Parts Washer Solvent Pumps and Where to Buy or Purchase the Parts Washer Solvent Pumps. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Parts Washer Solvent Pumps of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Parts Washer Solvent Pumps.
