Which Is The Best 1996 Ford Ranger Hood Lift

Replace your hood’s prop rod today with our Redline Tuning hood QuickLIFT system. Progressive gas springs will lift and hold your hood without the need for a poorly placed prop-rod, simply start to lift your hood and let our QuickLIFT system take over. Your hood will lift and hold firmly at the raised position – eliminate your prop rod today.

Replace your hood's prop rod today with our Redline Tuning hood QuickLIFT system. Progressive gas springs will lift and hold your hood without the need for a poorly placed prop-rod, simply start to lift your hood and let our QuickLIFT system take over. Your hood will lift and hold firmly at the raised position – eliminate your prop rod today.

Product Description

Today, air Lift load support products are sold worldwide and are engineered to fit over 540 vehicles. Our extensive product line offers air helper springs for trucks, RVs, SUVs, CUVs and vans, and the most technologically advanced on-board air Compressor systems for on-the-go air spring control.

From the Manufacturer

The LoadController II is an economically priced, popular on board air compressor system. It inflates, maintains and controls air springs on light-to-medium duty vehicles for maximum convenience and leveling on-the-go. The versatile compressor system makes it easy to adjust your air spring pressure for changes in load or road conditions. This is Air Lift’s most popular compressor and air control system for trucks, vans, and SUVs. All kits include Air Lift’s exclusive wiring harness for fast, easy installation. For increased safety and to eliminate the major cause of air spring failure, the Low Pressure Sensor automatically activates the compressor if air spring pressure falls below the minimum safe level.

This listing is for the single path system, kit number 25592.

Air Lift on board air systems are the most advanced in the industry and work with all brands of air springs.

Do I Need Single or Dual Path Control?
Purchase a single path/sensor model if you want to level your load evenly (to raise or lower the front or rear end of your vehicle). Two springs will inflate at the same rate at the same time.

Purchase a dual path/sensor model (kit number 25812) for uneven loads that need adjustment from one side of the vehicle to the other or for more advanced leveling capability. You can either control two air springs independently (for side-to-side leveling) or you can split the line to control a full set of four air springs, two at a time (side-to-side or front-to-rear).

Suggested Accessories
If you’re still in need of air helper springs, be sure to consider the many different air spring options Air Lift offers. With a lifetime warranty, the easiest installations, and best-in-class customer service, it’s easy to see why Air Lift air helper springs are America’s favorite.

Best Warranty in the Business
Air Lift Company warrants that the LoadController II on board air compressor system will be free from defects in workmanship or materials for two years on the vehicle of original installation. This does not include installation or other service charges for replacement.

Air Suspension Solutions that Fit, Work and Last
Air Lift Company has been developing air spring suspension products for almost 60 years. The versatility of Air Lift air springs was proven during the early years of stock car racing. Air Lift products were used by most of the stock car racing teams for twenty years and the sponsored cars were among the toughest competitors on the NASCAR Grand National Circuit.

Today, Air Lift has won more SEMA (Specialty Equipment Market Association) awards for air spring development products than any other company. Air Lift products are sold throughout the world and can be engineered to fit almost any coil or leaf spring suspension. The extensive product line includes everything from air helper springs for cars, vans and trucks to full air suspension replacement and control systems for recreational vehicles, emergency vehicles, hot rods and lowered performance vehicles.

Quality and Performance – the Air Lift Difference
As of February 2007, Air Lift Company is proud to be ISO 9001:2000 certified. ISO 9001:2000 applies to organizations which follow rigorous quality standards, and are committed to continuous improvement. Air Lift Company is dedicated to making suspension products that fit, work, and last.

Be sure to measure your hood and the distance from your wheel well to the top of the side fender to determine which size you need. This Self Healing, Universal, Clear Paint Protection Bra Hood And Fender Kit is a very durable, self-healing, 8 mill thick clear coated urethane film that helps preserve your vehicle’s finish. It helps protect against chips, abrasion and weathering–including stone chipping and most types of environmental damage. It is virtually invisible and clear-coated to help make it resistant to yellowing and staining. Once applied, no special care is required. The application is permanent. After installation, wait 24 hours before taking your vehicle through a car wash. Installation is easy, and we provide detailed installation videos to help make installation even easier. The kit includes the tools we use in our instructional video (also included). We offer a range of sizes to help cover the needs of any vehicle. Frequently Asked Questions Can I use wax over Clear Paint Protection Bra? Yes. When waxing the vehicle, some wax may build up along the film edges. This can easily be removed when dry with a soft cloth. Do not use any waxes containing dyes or waxes that are not recommended for urethanes. Abrasive polishes and/or rubbing compounds are not to be used. How is Clear Paint Protection Bra removed? If desired, film can be removed at any time by picking up a corner of the film and pulling the film off the vehicle surface at a 90-degree angle. If the film has been present a long time, or if the film and vehicle are cold, a heat gun or hair dryer may be used to soften the adhesive and making it easier to remove the film. If any adhesive remains on the vehicle after removal of the film, it can be removed by using an auto body adhesive remover. If Clear Paint Protection Bra is removed from the vehicle, can it be re-used? No. Once the film has been applied and set, the adhesive will not stick a second time

With Three User-Defined Memory Buttons. WirelssONE Can Remember Frequently Used Settings. Inflate/Deflate Both Air Springs To Equal Pressures. Easy Install In About One Hour. No Wires Or Air Lines Need To Run Into Cab. One-Touch Control From Inside/Outside The Vehicles. Compatible w/Any Brand Of Air Springs.

Gen mini on-board smart battery chargers are rugged and compact waterproof chargers for 12 Volts lead-acid batteries. They can be mounted onto virtually any vehicle, Like a boat, car, tractor, or RV. Safe to leave connected indefinitely, the Gen mini interactively diagnoses, recovers, and charges wet, gel, F and AGM batteries from 20-120 Ampere hour and maintains all battery sizes. The Gen mini is a smart battery charging solution for rugged environments, and includes multiple innovative features, such as 100 percent waterproof design, automatically recovers sulfated batteries, charges multiple battery chemistries, designed for user safety, protects against abnormal conditions, small, compact design, optimizes a battery’s specific gravity, charges 2x faster than traditional chargers, works with varying AV voltages, and ignition protected. Gen mini on-board smart battery chargers are rated at IP68, ETL approved for United States and Canada, and comes with a 5 year limited warranty.

FITS THE FOLLOWING VEHICLES

2001-2004 Ford Escape – 12.4 in. Compressed Length
2002 Ford Escape with 2.0L DOHC 4-Cyl Naturally Aspirated GAS engine – 12.4 in. Compressed Length
2002 Ford Escape with 3.0L DOHC V6 Naturally Aspirated GAS engine – 12.4 in. Compressed Length
2005 Ford Escape XLS – 12.4 in. Compressed Length
2005 Ford Escape XLT No Boundaries – 12.4 in. Compressed Length
2005 Ford Escape XLT Sport – 12.4 in. Compressed Length
2005-2006 Ford Escape Hybrid – 12.4 in. Compressed Length
2005-2006 Ford Escape Limited – 12.4 in. Compressed Length
2005-2006 Ford Escape XLT – 12.4 in. Compressed Length
2005-2007 Mercury Mariner – OEM Number: YL8Z7842104AA
2006 Ford Escape with 2.3L DOHC 4-Cyl Naturally Aspirated GAS engine – 12.4 in. Compressed Length

Conclusion

By our suggestions above, we hope that you can found 1996 ford ranger hood lift for you.Please don’t forget to share your experience by comment in this post. Thank you!