Which Is The Best Stainless Steel Hot Water Heater

The heat electric tank less water heater S-16 model has the capacity of heating 3.5 gpm which is the equivalent to 2 showers (at 1.5 gpm each), and 1 sinks (at 0.50 gpm each) simultaneously, or any combination which equals to 3.5 gpm. The S-16 can handle these applications in the warmer climates of the us which are Florida, Georgia, Louisiana, Texas, Arizona, California, Alabama, and Mississippi. Anything north of these States the S-16 model can be used for point of use, or 1- application at a time. A good rule of thumb is if you live in the southern States mentioned here the S-16 can power a 3 to 4 bedroom 2-1/2 bathroom home, including dishwasher and clothes washer, please keep in mind that tank less water heaters are designed to heat incoming water at a maximum output temperature based on simultaneous use and inlet water temperatures. So if your demand for hot water decreases your output water temperatures will increase, as well as if you live in the colder States this S-16 will heat less volume of water, this will cause the S-16 to be used in point of use applications in the colder climates.

Please Note:

1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.

2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.

3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.

4、Please use only liquid propane as fuel and use it in a well-ventilated place.

5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.

6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.

7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.

An Amazon Brand.

Tea? Hot chocolate? Instant soup? If you have a taste for it, Hamilton Beach Kettles can have it ready in minutes. The powerful rapid-boil system provides fast heat-up from any standard outlet and the auto shutoff function helps keep kettles from boiling dry. Hamilton Beach Kettles are great looking and easy to use. Plus, most kettles include a 360-degree rotating or cordless base for easy serving. Hamilton Beach Kettles feature a stay-cool handle and drip-free spout that makes pouring easy.

Hard water is water that contains calcium or magnesium mineral ions often in the form of carbonate. These ions do not pose any health threat, but they can engage in reactions that leave insoluble mineral deposits. Hard water mineral deposits, or scaling, is the precipitation of minerals which form limescale.

How to Descale?

1. Fill the kettle with 1 cup of vinegar or lemon juice and 2 cups of water.

2. Boiling the liquids and leave it for 2 hours, then use cloth to clean and wipe.

3. Rinse the kettle with clean water, and dry with a soft, clean cloth.

4. Repeat as needed.

Note: Its normal if your kettle exposes spot or rust on the stainless steel bottom after the first use, if the water quality in your area is so hard.​

Specifications

• Type: Electric Water Warmer, Boiler and Dispenser

• Max Capacity: 1 Gallon (4.0L)

• 2 ways to dispense water with the button on the top of the housing, or the cup switch behind the spout.

• Big Windows Water-level gauge with night light: Easy to read water level with low light

• 3 Temperature setting: Instant food, 208ºF (tea), 185ºF (coffee), and 149°F (instant soup, hot cereal, etc.)

• Micro-computerized temperature-control system heater located on the bottom

• Keep Warm Function

• Automatically Re-boil

• Dry-boiled protection

• Water outlet: Auto electric pump

• Auto electric pump lock for safety purpose

• Stainless steel outer shell and inner pot

• Power: 750W

Fire Catching Ways: Electricity pulse automatic fire catching
Discharge Ways: Flue automatic gas discharge
Applicable water pressure :Zero pressure starting
Cold water / Warm water connection: G1/2” tube
NPT 1/2″ female to G 1/2″ male
Gas inlet: G1/2”
Vent Type:4.3″ Flue Duct
Automatic ignition system, Flame failure protection device
Water & gas combination unit ,Fitted with over heating and pressure safeguard
20 min. off self-timer
Mains power not required
Electrical requirement: DC3V, Automatic electric ignition powered by two (2) size ‘D’ batteries (batteries not included); No electrical hook up; No standing pilot
Gross weight: 9.5KG
Description:
1. High efficient energy saving : the heater exchanger and main burner adopt mostly advanced energy-saving and combustion technology to decrease gas consumption and burning noise.
2. Low water-pressured startup : the water control linkage valve makes the heater start up under low water pressure and shortage areas and those living in high stairs.　
3. Manifold auto protection : for the sake of your safety　
4. Ion flame inspection : to automatically shut down gas power under unexpected flameout.　
5. Over water pressure protection function : to automatically decrease pressure under excessive high water pressure.
6. Controller design : both cold water and warm water can be properly controlled
7. Magnificent thin-shaped appearance : it is designed by modern fashionable line shape.
Attention:
We have adapters which can convert G thread connector to NPT connector (not include in the list) ,if you need ,please search ASIN: B01N03LFUF on our store.

Conclusion

By our suggestions above, we hope that you can found stainless steel hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!