Which Is The Best 2 Stage Heating And Cooling 110V
Nowadays, there are so many products of 2 stage heating and cooling 110v in the market and you are wondering to choose a best one. You have searched for 2 stage heating and cooling 110v in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 2 stage heating and cooling 110v which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1650W (110V)
- Over temperature & faulty sensor alarm, with power off memory
Inkbird Temperature Controller ITC-308 Thermostat 110V, 1100W Pre-Wired Dual Stage Digital Outlet Heating & Cooling for Homebrewing Refrigerator etc.
- Pre-wired controller ITC-308 is served as the successor to the STC-1000. If you don’t want to build your own STC-1000, the Inkbird ITC-308 is the solution!
- Setup is easy, straightforward and quick.
- The cord on the remote temperature sensor is a bit over 6 feet long.
- Accurate displays, thermostatic function and temperature calibration.
- It’s an all in one, simple solution providing control of cooling and heating.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
DIGITEN LCD Digital Thermostat Temperature Controller Simple Stage Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 15A
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【Easy to use and program】: Only 2-step settings for your application, it can be used for heating mode or refrigeration mode.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: 1650W@110V, 3000W@220V, max current: 15A.
- ★【Multipurpose & Warranty】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc. 12 month warranty!
This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.
Features:
Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
High and low temperature alarms are available
Over-temperature and sensor fault alarm
Specifications:
Power Supply: 100-240VAC 50/60HZ
Max output load: 1650W@110V, 3000W@220V
Max current: 15A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
Packaging include:
1 x DTC151 Temperature Controller
1 x NTC sensor
1 x Manual
DIGITEN LCD Digital Thermostat Temperature Controller 2-Stage Dual Outlet Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 10A
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Heating & Cooling Mode】: Dual relay output, it can control heating and refrigeration equipment at the same time.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: 1100W@110V, 2200W@220V, max current: 10A.
- ★【Wide Applications & Warranty】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc. 12 month warranty!
The DTC-102 Thermostat is dual-stage, digital temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality.
Features:
Large LCD screen, glare free and eye protected;
Dual relay output, be able to control heating and refrigeration equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Max current: 10A;
Max output load: 1100W@110V, 2200W@220V;
Easy to use and program, Plug and play device;
Built-in a temperature correction function;
Delay starting protection for refrigerating compressor;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Heating/Cooling differential could be set separately for refrigeration and heating to protect temperature controller from violent change;
Can use heating or cooling function separately.
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating and Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃,1℉
Buzzer Alarm: High and Low Temperature Alarm
Relay Contact Capacity: Heating(10A, 100-240VAC), Cooling(10A, 100-240VAC)
Sensor Type: Waterproof NTC sensor
Sensor Length:Approx 2m(6 ft)
Input Power Cable Length: 120 cm/4ft
Output Power Cable Length: 30cm/6.5″
Controller Dimension: 137*65*28mm
Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
Packaging include:
1 x DTC-102 Temperature Controller
1 x NTC sensor
1 x Manual
COVVY XH-W3002 Digital Temperature Controller Pre-Wired Thermostat with Waterproof Sensor Probe,2 Stage Heating and Cooling Mode 110-220VAC Temp Controller
- Made of ABS material, high temperature resistance can be used for a long time, high safety, rugged and durable.
- Heating/cooling modes, users can set the start/stop temperature freely.
- Wide temperature control range from -50℃ to 110℃ and high temperature control precision of 0.1℃.
- Large and clear LED display for better reading whether it is day or night.
- Package include 1pcs temperature controller & 1 pcs sensor probe.
This is an AC 110V-220V digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
Parameter:
Model: XH-W3002
Voltage: AC 110-220V
Temperature Measurement Range: -50~110℃
Temperature Control Precision: 0.1℃
Load Power: 1500W
Measuring Input: NTC10K 1M waterproof probe
Output: Max 10A
Installation Hole Distance: 73mm / 2.87″
Size: 60 x 45 x 31mm / 2.36 x 1.77 x 1.22″
Package Included: 1 x XH-W3002 Temperature Controller 110-220V
1 x 3ft Sensor Probe
1 x Manual
Conclusion
By our suggestions above, we hope that you can found 2 stage heating and cooling 110v for you.Please don’t forget to share your experience by comment in this post. Thank you!